Operation
Mode Functions
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
Voice ActivatedTransmit (VOX)
•
In VOX mode, your microTALK radio can be used
10 Memory Locations
•
Your microTALK radio has 10 Memory Locations for storing your most frequently used channels and channel/privacy code combinations. These Memory Locations can be selected individually or can be scanned. (See page 21 for memory location scan.)
Mode Button
VOX Icon
Channel Buttons
Mode Button
To turn VOX mode on or off:
1.Press the Mode button until the VOX icon flashes on the display. The current on or off setting is displayed.
2.Press the Channel Up or Channel Down button to turn VOX on or off.
3.Choose one of the following:
a.Press the Mode button to enter the selected on or off setting and proceed to other functions.
b.Press the Lock/Enter button to enter the selected on or off setting and return to Standby mode.
To set VOX sensitivity:
1.Press the Mode button until the VOX icon flashes and the current sensitivity level is displayed.
Mode Button
Memory Icon
Channel Buttons
Lock/Enter Button
To program a memory location:
1.Press the Mode button until the Memory icon and the memory location flash on the display.
2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).
If a location has been programmed before, its associated channel/privacy code will be shown on the display.
3. | Press the Lock/Enter button to enter |
| a new memory location or edit an already |
| programmed memory location. The channel |
| numbers will flash on the display. |
4. | Press the Channel Up or Channel Down |
| button to select a channel (1 through 22). |
5. | Press the Lock/Enter button. |
VOX Sensitivity Level |
The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01 being the least sensitive level.
The CTCSS icon and privacy code |
numbers will flash on the display. |
Channel Buttons
2. Press the Channel Up or Channel Down button to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter the selected setting and proceed to other functions.
b. Press the Lock/Enter button to enter the selected setting and return to Standby mode.
12 | Nothing Comes Close to a Cobra® 13 |