Cooper Lighting H456ICAT120D specifications Halo LED H4 Series

HALO LED H4 Series

The Halo H4 LED is a family of 4” aperture recessed downlight housings designed for use with Halo EL4 Series LED Light Engines and compatible 4” LED trims. Halo H4 LED housings have integral LED drivers that offer dimming as a standard feature.

H456ICAT120D is an insulated ceiling, AIR-TITETMhousing offering 120 volt dimming capability with many incandescent or electronic low voltage dimmers. Designed for use with EL4 series LED Light Engines and TL4 LED Series Trims, the H456ICAT120D offers high quality downlighting along with high efficacy – the result being great lighting and significant energy savings.

Catalog #

Project

Comments

Prepared by

HALO®

Type

Date

DESIGN FEATURES

MECHANICAL			installed without tools and		incandescent and magnetic low
Housings			without removing knockouts.		voltage dimmers; and dims to 5%
		•	Accepts a wide range of		using dimmers with low end trim
•	Box enclosure of formed
	aluminum construction.		non-metallic (type NM) sheathed	•	adjustment.
•	Openings are gasketed		cables - the standard cable types		Standard incandescent dimmers
			used in lighting in both U.S. and		require a minimum load of
	AIR-TITE.
			Canada.		typically over 40 watts on the
•	Designed for insulated ceilings in
			- Allows wiring connections to be		circuit for full range dimming
	direct contact with insulation.
			made outside the junction box		performance (four LED modules).
	(May also be installed in
			- Simply insert the cable directly	•	For dimming with digital (smart)
	non-insulated ceilings.)
Plaster Frame			into the trap after connections		multi-location dimmers or when
			are made.		dimming fewer than four LED
•	Galvanized steel die-formed		- Accommodates the following		modules, LED rated or electronic
	construction.				low voltage dimmers are required
			standard non-metallic sheathed
• The housing can be removed from					(ELV dimmers need a neutral
			cable sizes:
	plaster frame to provide access to				connection in the wallbox).
			(US) #14/2, #14/3, #12/2, #12/3
	the junction box.			Labels
			(Canada) #14/2, #14/3, #12/2
•	Plaster frame features include:
				•	UL/cUL Listed 1598 Luminaire
		LED Connection
	- Patented regressed locking screw
				•	UL/cUL Listed for Damp Location
	positioned for securing hanger	•	LED connector is a non-screw base
				•	UL/cUL Listed for Wet Location,
	bars from below the ceiling.		connector offering easy installation
					covered ceiling - with select trims
	- Cutouts for easily crimping		with the EL4 Series LED Light
				•	UL/cUL listed for Feed Through
			Engine.
	hanger bars in position.
		•	LED connector meets California	•	UL/cUL listed for Direct Contact
	- AIR-TITE aperture gasket is
			Title-24 high-efficacy luminaire		with insulation and combustible
	pre-installed.
			requirement for a non-screw		material
	- HALO identity embossed on
			base socket, and where required	Compliance
	plaster frame.
			to qualify as a high-efficacy	•	Use with designated LED light
GOT NAIL! Pass -N-Thru™
			luminaire.		engines and trims for ENERGY
Bar Hangers		LED Driver			STAR® qualification.
•	Pre-installed nail easily installs	•	LED dimmable driver mounts	•	Can be used for State of California
	in regular lumber, engineered
			to the housing.		Title 24 high efficacy compliance
	lumber and laminated beams.
		•	Driver is a120 Volt, high efficiency,		with designated LED light engines
•	Safety and guidance system
			electronic power supply providing		and trims.
	prevents snagging, ensures
			low voltage power to EL Series	•	Can be used for International
	smooth straight nail penetration
			LED Light Engines.		Energy Conservation Code (IECC)
	and allows bar hangers to be easily
		•	Driver meets FCC EMI/RFI		high efficacy compliance with
	removed if necessary.
			Consumer Level limits for use in		designated LED light engines
•	Automatic leveling flange aligns
			residential and commercial		and trims.
	the housing and lets you hold the
			installations.	• Refer to specification sheets online
	housing in place with one hand
		•	Driver features high power factor		for compliance information.
	while driving nails.
			and low THD and has integral	Qualification
•	Housing can be positioned at any
			thermal protection in the event	IC and AIR-TITE™
	point within 24” joist span.
			of over temperature or internal	Certified under ASTM-E283 and
•	Pass-N-Thru™ feature allows bar
			failure.
				listed UL/cUL 1598. May be used to
	hangers to be shortened without
		•	Driver is specifically designed
				meet insulated ceiling and restricted
	removing from plaster frame.
			for compatibility with EL4 LED	air-flow requirements such as:
•	Score lines allow “tooless”
			Light Engines, and operates the		• Washington State Energy Code
	shortening for 12” joists.
			LED for long life, meeting 50,000
					• International Energy
• Bar hangers may be repositioned
			hour / 70% lumen maintenance
					Conservation Code (IECC)
	90°.		standard.
					• New York State Energy
•	Integral T-bar clip snaps onto	•	If dimming is not required the
					Conservation Construction
	T-bars - no additional clips		fixture can be operated from a
					Code (NY-ECCC)
	required.		standard wall switch.
					• State of California Title 24
Slide-N-Side™ Junction Box		Dimming
					“Recessed Luminaires in
• Positioned to accommodate		• The HALO H4 LED luminaire is
					Insulated Ceilings.”
	straight conduit runs		dimmable to 15% with most
•	Seven 1/2” trade size conduit		standard 120V dimmers;
	knockouts with true pry-out slots		including LED-rated and
• Slide-N-Side™wire traps allow			electronic low voltage dimmers
	non-metallic sheathed cable to be		(recommended); many

www.cooperlighting.com

H456ICAT120D

4-Inch LED

Recessed Housing

New Construction

Insulated Ceiling -

With 4” LED Light Engines

and 4” LED Trims

High Efficacy LED Housing- Dimmable

F O R U S E I N I N S U L AT E D C E I L I N G S F O R D I R E C T C O N TAC T W I T H I N S U L AT I O N

A L S O S U I TA B L E F O R N O N - I C A P P L I C AT I O N S

H4 Series LED Energy Data:

(Values at non-dimming line voltage.) Minimum Starting Temp: -30°C (-22°F) EMI/RFI: FCC Title 47 CFR, Part 18 (Consumer)

Sound Rating: Class A standards

Input Voltage: 120V

Power Factor: >0.90

Input Frequency: 50/60Hz

THD: <20%

Rated Wattage: 15W max.

Input Power: 14.0W

Input Current: 121mA

Driver Compliance: UL6950, LPS rated Maximum IC (Insulated Ceiling) Ambient Continuous Operating Room Temperature: 25°C (77°F)

Maximum Non-IC (Non-Insulated Ceiling) Ambient Continuous Operating Room Temperature: 40°C (104°F)

H4 Series LED

Summary Lighting Data:

Lumen range:. . . . . . . 534-700

Lumens per watt:. . . . . . up to 46

Color

Correlated Color Temperature

(CCT):. . . . . . . . 2700K-4000K

Color Rendering Index (CRI, Ra):. . 80

ADV110681

rev 4/8/11