Cobra Electronics PR260 WX owner manual Using Your Radio, Speaker/Microphone/Charge Jack

Page 6

Using Your Radio

Operation

Speaker/Microphone/Charge Jack

•

Speaker/Microphone

To attach a speaker/microphone:

/Charge Jack

1. Open the speaker/microphone/charge

 

tab on top of your microTALK® radio.

2. Insert the plug into the speaker/ microphone/charge jack.

To connect a wall charger/adapter:

1.Open the speaker/microphone/charge tab on top of your microTALK® radio.

2.Insert the wall charger/adapter plug

into the speaker/microphone/charge jack.

Quick Start

1. Press and hold the Mode/Power button to turn on your radio.

2.Press the Channel Up or Channel Down button to select a channel.

Both radios must be tuned to the same channel to communicate.

3.Press and hold the Talk button while speaking into the microphone.

4.When finished talking, release the Talk button and listen for a response.

2

Page 5 Page 7
Image 6
Page 5 Page 7
Contents PR260 WX Customer Assistance Operators Making Life Easier and SaferAutomated Help Desk Questions Product Features Features 117To charge batteries in radio Replace battery compartment cover and belt clipCaring for Your microTALK Radio Check to see that the batteries have been inserted properlyUsing Your Radio Speaker/Microphone/Charge JackTo connect a wall charger/adapter Auto Battery Save Communicating with Another PersonListening for a Response To Adjust Volume Press the Volume Up or VolumeTo Select a Channel Call ButtonTo turn maximum range extender off Light/Max Range To temporarily turn off auto squelchTo turn maximum range extender on To turn the lock on or offYour range will vary depending on terrain and conditions Scrolling Through the Mode FunctionMicroTALK Range Set Privacy CodeCtcss Privacy Codes To select a privacy codeNOAA* All Hazards Radio Channels Mode FunctionsTo turn VOX mode on or off To listen to all hazards radio channelsTo Set VOX Sensitivity Channel ScanTo scan channels This will return the radio to Standby mode Privacy Code Scan To scan privacy codesPress the Mode/Power button to proceed to other functions If you press the Talk button while scanning and not withinRoger Beep Confirmation Tone Five Call Tone SettingsTo change a call tone setting To turn roger beep on or offGeneral Specifications and Licensing General SpecificationsImportant Notice FCC License Required Product Service Product Service QuestionsWarranty and Trademark Acknowledgement Limited One-Year Warranty on Radios & ChargerEnglish
Top Page Image Contents