Cobra Electronics CXR825C owner manual To de-program a memory location, Channel Scan

Page 11

Operation

Mode Button

Memory Icon

Mode Functions

To de-program a memory location:

1.

Press the Mode button until the

 

Memory icon and the memory location

 

flash on the display.

2.

Press the Channel Up or Channel Down

 

button to select the memory location

 

(0 through 9).

 

Introduction

 

Customer Assistance

 

Warranty

 

 

Operation

 

 

Channel Scan

Your microTALK radio can automatically scan channels.

Mode Button

To scan channels:

1. Press the Mode button until the Scan icon and the channel numbers flash on the display.

Channel Button

Lock/Enter Button

Channel 0

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Lock/Enter button. The channel

numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select Channel 0.

5. Choose one of the following:

a. Press the Lock/Enter button to enter the channel/privacy code in the selected memory location and return to the beginning of memory location options.

b. Press the Mode button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

While de-programming a memory location,

if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

Scanning Channels

Channel Button

2.Press the Channel Up or Channel Down button to begin scanning channels.

The radio ignores specific privacy codes while scanning channels.

The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds.

While setting channel scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel or channel/privacy code displayed before you entered mode functions.

 

 

Nothing Comes Close to a Cobra® 17

 

16 English

 

Image 11
Contents Customer Assistance Operators Making Life Easier and SaferFor Assistance in Canada or the U.S.A Automated Help DeskLimited One-Year Warranty on Radios & Charger Product FeaturesWarranty Caring for Your microTALK Radio Rechargeable Battery Pack Desktop ChargerTo install or replace battery pack Replace battery compartment cover and belt clipCommunicating with Another Person Using Your RadioBattery Low Auto Battery SaveTo alert another person that you are calling Or Channel Down buttonTo attach a speaker/microphone To turn the lock feature on or offFor less than five seconds To turn maximum range extender onSet Ctcss Privacy Codes Mode FunctionsScrolling through Mode Functions Privacy CodesNOAA* All Hazards Radio Channels Standby modeSet DCS Privacy Codes To select a DCS privacy codeFlash on the display To turn VOX mode on or offPress the Mode button until To program a memory locationWhile recalling a stored memory location Press the Mode button toChoose one of the following Memory location number flash on the displayChannel Scan To de-program a memory locationPrivacy Code Scan Press the Mode button to proceed to set privacyPress the Channel Up or Channel Down button to To scan memory locations Memory Location ScanVibrAlert and Call Alert To change call settingsTo change keystroke tones Call Tone SettingsTo change a call tone setting Keystroke TonesGeneral Specifications General Specifications FCC LicenseSafety Information for microTALK Radios Product ServiceSafety and Trademark Product Service