Cobra Electronics CXR825C For less than five seconds, To turn maximum range extender on

Page 6

Operation

Auto Squelch/Maximum Range

Your microTALK radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise due to terrain and conditions. This slightly reduces the Maximum

 

Introduction

 

Customer Assistance

 

Warranty

 

 

Operation

 

 

Speaker/Microphone/Charge Jack

Your microTALK radio can be fitted with an external Speaker/Microphone, freeing your hands for other tasks. This same jack also serves as the connecting point for the wall charger/adapter.

Range at which signals can be heard.

You can turn off auto squelch to allow all signals to be received and extend the maximum range of your radio.

Light/Max Range

To briefly turn off auto squelch:

 

Press the Light/Max Range button

 

for less than five seconds.

If you hear two beeps, you have turned

the maximum range extender on (see below).

To turn maximum range extender on:

Speaker/Microphone/ Charge Jack

To attach a speaker/microphone:

1.Open the speaker/microphone/charge tab on top of your microTALK radio.

2.Insert the plug into the speaker/ microphone/charge jack.

To connect a wall charger/adapter:

1.Open the speaker/microphone/charge tab on top of your microTALK radio.

2.Insert the wall charger/adapter plug

into the speaker/microphone/charge jack.

Press and hold the Light/Max Range button for at least five seconds until you hear two beeps which indicates the maximum range extender is on.

To turn maximum range extender off:

Press and release the Light/Max Range button or change channels.

Lock Feature

The Lock feature locks the Channel, Mode, Hi•Low and Power buttons to prevent accidental operation.

Signal Strength

 

Signal Strength Meter

 

 

Your microTALK radio has a Signal Strength

 

 

 

 

 

 

 

Meter that shows the strength of your incoming

 

 

 

 

 

 

and outgoing transmissions. The ascending bars

 

 

 

next to the signal strength indicate the strength

 

 

 

 

 

 

 

 

of the signal. The greater the number of bars

 

 

 

 

visible, the stronger the signal. The fewer

 

 

 

 

number of bars visible, the weaker the signal.

 

microTALK Range

Your range will vary depending on terrain and conditions.

 

Lock/Enter Button

Lock Mode

To turn the lock feature on or off:

Press and hold the Lock/Enter button for two seconds.

A double beep sound is used to confirm your lock on or off request. When in Lock mode, the Lock icon will be displayed.

Maximum Range

Reduced Range

Reduced Range

In flat, open country your radio will operate at maximum range.

Buildings and foliage in the path of the signal can reduce the range of the radio.

Dense foliage and hilly terrain will further reduce the range of the radio.

On FRS channels 8 through 14, your radio automatically switches to low power, which will limit the range the radio can communicate.

Remember, you can achieve maximum range by using maximum range extender. See page 6 for details.

6 English

Nothing Comes Close to a Cobra® 7

Image 6
Contents Automated Help Desk Making Life Easier and SaferFor Assistance in Canada or the U.S.A Customer Assistance OperatorsProduct Features WarrantyLimited One-Year Warranty on Radios & Charger Replace battery compartment cover and belt clip Rechargeable Battery Pack Desktop ChargerTo install or replace battery pack Caring for Your microTALK RadioAuto Battery Save Using Your RadioBattery Low Communicating with Another PersonOr Channel Down button To alert another person that you are callingTo turn maximum range extender on To turn the lock feature on or offFor less than five seconds To attach a speaker/microphonePrivacy Codes Mode FunctionsScrolling through Mode Functions Set Ctcss Privacy CodesTo select a DCS privacy code Standby modeSet DCS Privacy Codes NOAA* All Hazards Radio ChannelsTo program a memory location To turn VOX mode on or offPress the Mode button until Flash on the displayMemory location number flash on the display Press the Mode button toChoose one of the following While recalling a stored memory locationTo de-program a memory location Channel ScanPress the Mode button to proceed to set privacy Press the Channel Up or Channel Down button toPrivacy Code Scan Memory Location Scan To scan memory locationsTo change call settings VibrAlert and Call AlertKeystroke Tones Call Tone SettingsTo change a call tone setting To change keystroke tonesGeneral Specifications FCC License General SpecificationsProduct Service Product ServiceSafety and Trademark Safety Information for microTALK Radios