Mode Functions
Operation
If you press the Talk button while scanning and not within ten (10) seconds of receiving a transmission, you will transmit on the memory location on which, during scanning, you last received
a transmission. This will return the radio to Standby mode.
If you do not press any button within ten (10) seconds, your radio will automatically resume scanning memory locations.
During Memory Location Scan (while not receiving a transmission), You Can Choose From The Following:
a. Press and hold the Talk button to communicate on the channel/privacy code that was displayed before you entered mode functions or memory location on which, during scanning, you last received a transmission. This will return the radio to Standby mode.
b. Press the Mode button to proceed to other functions.
c. Press the Lock button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the memory location on which, during scanning, you last received a transmission.
To reduce the number of memory locations being scanned, you may
Introduction | Operation | Customer Assistance Warranty |
VibrAlert® And Call Tones
•
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently, or both.
Mode Button | To Change Call Settings: | VibrAlert® + Ring |
1.Press the Mode button until the Call Setting icon flashes on the display. The current
Channel Button | setting (vibrate + ring, | VibrAlert® Only |
| vibrate only, or ring only) |
|
is displayed.
2. | Press the Channel Up or |
|
| Channel Down button to |
|
|
| |
| change the call setting. | Ring Only |
|
| |
3. | Choose one (1) of |
|
| the following: |
|
a. Press the Mode button to enter the new setting
and proceed to other functions.
b. Press the Lock button to enter the new
setting and return to Standby mode.
Ten (10) Call Tone Settings
•
You can choose between ten (10) different call tone settings to transmit a unique call alert.
Mode Button | To Change A Call Tone Setting: |
| 1. Press the Mode button until the letter “C” |
| and the current call tone number (01 through |
| 10) is displayed. |
Call Tone Setting
Channel Button
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.Choose one (1) of the following:
a.Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock button to enter the new setting and return to Standby mode.
18 English
Nothing comes close to a Cobra™ 19