Mode Functions
Operation
While setting a memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.
Introduction
Mode Button
Operation | Customer Assistance Warranty |
To De-Program A Memory Location:
1. | Press the Mode button until the Memory icon |
| and the memory location flash on the display. |
2. | Press the Channel Up or Channel Down |
Mode Button
Memory Icon
Channel Button
To Recall A Stored Memory Channel Location:
1.Press the Mode button until the Memory icon and the memory location number flash on the display.
2.Press the Channel Up or Channel Down button to select a memory location
(0 through 9).
If a location has been programmed before, its associated channel/privacy code will be shown on the display.
3.Press the Talk button to return to Standby mode on the selected memory location.
Pressing the Lock button will put you in “program a memory location.”
While recalling a stored memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.
Memory Icon
Channel Button
Lock Button
Channel 0
button to select the memory location |
(0 through 9). |
If a location has been programmed before, its associated channel/privacy code will be shown on the display.
3.Press the Lock button. The channel numbers will flash on the display.
4.Press the Channel Up or Channel Down button to select Channel 0.
5.Choose one (1) of the following:
a.Press the Lock button to enter the channel/privacy code in the selected memory location and return to the beginning of memory location options.
b.Press the Mode button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.
While de-programming a memory location,
if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.
12 English | Nothing comes close to a Cobra™ 13 |