Cobra Electronics LI 6000WXC owner manual VibrAlert and Call Alert, To change call settings

Page 15

Mode Functions

Operation

During memory location scan (while receiving an Incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

VibrAlert® and Call Alert

•

Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently or both.

memory location.

b. Your radio will remain on that memory location and return to Standby mode. Press the Channel Up or Channel Down button to resume scanning memory locations.

c. After 10 seconds of inactivity, unit starts scan again.

If you press the Talk button while scanning, but more than

10 seconds after receiving a transmission, you will transmit on the memory location on which, during scanning, you last received a transmission.

If you do not press any button within 10 seconds, your radio will automatically resume scanning memory locations.

Mode Button

Channel Buttons

To change call settings:

1.Press the Mode button until the Call Setting icon flashes on the display. The current setting (“01” vibrate + ring, “02” vibrate only or “03” ring only)

is displayed.

2.Press the Channel Up or Channel Down button to change the call setting.

3.Choose one of the following:

VibrAlert® + Ring

VibrAlert® Only

Ring Only

During memory location scan (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel/privacy code that was displayed before you entered mode functions or memory location on which, during scanning, you last received a transmission.

b. Press the Mode button to proceed to other functions.

c. Press the Lock/Enter button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the memory location on which, during scanning, you last received a transmission.

To reduce the number of memory locations being scanned, you may de-program any unwanted locations. (See page 16 to de-program a memory location.)

a. Press the Mode button to enter the new setting

and proceed to other functions.

b. Press the Lock/Enter button to enter the new setting and return to Standby mode.

 

 

 

 

22 English

Nothing Comes Close to a Cobra® 23

Page 14 Page 16
Image 15
Page 14 Page 16
Contents
LI 6000WXC Making Life Easier and Safer Hi Med Low Product FeaturesFeatures Power IconsEstimated operation time on full charge 11 hours Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Caring for Your microTALK RadioUsing Your Radio Call Button Listening for a Response When you are finished talkingChannels To select a channelAuto Squelch/Maximum Range Signal Strength Signal Strength MeterLock Feature To turn the lock feature on or offSet Ctcss Privacy Codes Mode FunctionsScrolling through Mode Functions Privacy CodesNOAA* All Hazards Radio Channels Standby modeSet DCS Privacy Codes To select a DCS privacy codeTo program a memory location To turn VOX mode on or offVoice Activated Transmit VOX Memory LocationsWhile recalling a stored memory location Press the Mode button toChoose one of the following To recall a stored memory channel locationFlash on the display To de-program a memory locationChannel Scan To scan channelsTo scan privacy codes Press the Mode button to proceed to set privacyPrivacy Code Scan If you press the Talk button while scanning, but more thanNumber flash on the display Press the Mode button until the Scan iconMemory Location Scan To scan memory locationsVibrAlert and Call Alert To change call settingsThrough 10 is displayed Call Tone SettingsTo change a call tone setting Press the Mode button untilFor Products Used in Canada General Specifications LicensingGeneral Specifications LicensingCobra line of quality products includes Trademark, Products Product ServiceProduct Service Questions Trademark AcknowledgementFor Products Purchased in Canada WarrantyLimited One-Year Warranty on Radios & Charger Day Warranty on Cobra Lithium Ion Rechargeable Batteries
Related manuals
Manual 19 pages 22.5 Kb