Cobra Electronics LI 6000WXC Auto Squelch/Maximum Range, To turn maximum range extender on

Page 7
Speaker/Microphone/Charge Jack

Using Your Radio

Operation

Auto Squelch/Maximum Range

Your microTALK® radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise due to terrain and conditions. This slightly reduces the Maximum

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

Your microTALK® radio can be fitted with an external Speaker/Microphone, freeing your hands for other tasks. This same jack also serves as the connecting point for an optional wall charger/adapter.

Range at which signals can be heard.

You can turn off auto squelch to allow all signals to be received and extend the maximum range of your radio.

Light/Max Range To briefly turn off auto squelch:

Press the Light/Max Range button for less than five seconds.

If you hear two beeps, you have turned

the maximum range extender on (see below).

To turn maximum range extender on:

Speaker/Microphone/ Charge Jack

To attach a speaker/microphone:

1.Open the speaker/microphone/charge tab on top of your microTALK® radio.

2.Insert the plug into the speaker/ microphone/charge jack.

To connect a wall charger/adapter:

1.Open the speaker/microphone/charge tab on top of your microTALK® radio.

2.Insert the wall charger/adapter plug

into the speaker/microphone/charge jack.

Press and hold the Light/Max Range button

for at least five seconds until you hear

Signal Strength Signal Strength Meter

two beeps which indicates the maximum

range extender is on.

To turn maximum range extender off:

Press and release the Light/Max Range button or change channels.

Lock Feature

The Lock feature locks the Channel, Mode, Hi•Low and Power buttons to prevent accidental operation.

Your microTALK® radio has a Signal Strength Meter that shows the strength of your incoming and outgoing transmissions. The ascending bars next to the signal strength indicate the strength of the signal. The greater the number of bars visible, the stronger the signal. The fewer number of bars visible, the weaker the signal.

microTALK® Range

Your range will vary depending on terrain and conditions.

Lock/Enter Button

Lock Mode

To turn the lock feature on or off:

Press and hold the Lock/Enter button for two seconds.

A double beep sound is used to confirm your lock on or off request. When in Lock mode, the Lock icon will be displayed.

Maximum Range

Reduced Range

Reduced Range

In flat, open country your radio will operate at maximum range.

Buildings and foliage in the path of the signal can reduce the range of the radio.

Dense foliage and hilly terrain will further reduce the range of the radio.

On FRS channels 8 through 14, your radio automatically switches to low power, which will limit the range the radio can communicate.

Remember, you can achieve maximum range by using maximum range extender. See page 6 for details.

6 English

Nothing Comes Close to a Cobra® 7

Image 7 Contents
LI 6000WXC Making Life Easier and Safer Hi Med Low Product FeaturesFeatures Power IconsEstimated operation time on full charge 11 hours Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Caring for Your microTALK RadioUsing Your Radio Call Button Listening for a Response When you are finished talkingChannels To select a channelAuto Squelch/Maximum Range Signal Strength Signal Strength MeterLock Feature To turn the lock feature on or offSet Ctcss Privacy Codes Mode FunctionsScrolling through Mode Functions Privacy CodesNOAA* All Hazards Radio Channels Standby modeSet DCS Privacy Codes To select a DCS privacy codeTo program a memory location To turn VOX mode on or offVoice Activated Transmit VOX Memory LocationsWhile recalling a stored memory location Press the Mode button toChoose one of the following To recall a stored memory channel locationFlash on the display To de-program a memory locationChannel Scan To scan channelsTo scan privacy codes Press the Mode button to proceed to set privacyPrivacy Code Scan If you press the Talk button while scanning, but more thanNumber flash on the display Press the Mode button until the Scan iconMemory Location Scan To scan memory locationsVibrAlert and Call Alert To change call settingsThrough 10 is displayed Call Tone SettingsTo change a call tone setting Press the Mode button untilFor Products Used in Canada General Specifications LicensingGeneral Specifications LicensingCobra line of quality products includes Trademark, Products Product ServiceProduct Service Questions Trademark AcknowledgementFor Products Purchased in Canada WarrantyLimited One-Year Warranty on Radios & Charger Day Warranty on Cobra Lithium Ion Rechargeable Batteries
Related manuals
Manual 19 pages 22.5 Kb