|
|
|
|
|
|
| Introduction | Operation | Customer Assistance | Warranty |
|
Caring for Your microTALK® Radio
•
Your microTALK® radio will give you years of
Avoid exposure to extreme temperatures.
Remove Belt Clip
Pull Up Lock Latch
Insert Batteries
Batteries
•
To Install Or Replace Batteries:
1.Remove belt clip by releasing belt clip latch and sliding clip up.
2.Pull up on the battery door latch to remove the battery compartment cover.
3.Insert four (4) AAA batteries. (Always use high quality alkaline batteries.) Position batteries according to polarity markings.
4.Replace battery compartment cover and belt clip.
Contact your local Cobra® dealer or Cobra® directly for optional accessories. Only Cobra® authorized accessories are recommended.
The Basics to Get You Started
Your microTALK® radio is easy to use. To get started, simply:
1.Press and hold the Mode/Power button to turn On your radio.
2.Press the Channel Up or Channel Down button to select a channel.
Both radios must be tuned to the same channel to communicate.
3.Press and hold the Talk button while speaking into the microphone.
4.When finished talking, release the Talk button and listen for a response.
Nothing comes close to a Cobra® 1