Cobra Electronics LI 3900DX VibrAlert and Call Alert, Call Tone Settings, To change call settings

Page 15

Mode Functions

Operation

VibrAlert® and Call Alert

•

Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently or both.

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

10 Call Tone Settings

•

You can choose from 10 different call tone settings to transmit a unique call alert.

Mode Button

To change call settings:

1. Press the Mode button

until the Call Setting icon

flashes on the display.

VibrAlert® + Ring

Mode Button

To change a call tone setting:

 

1. Press the Mode button until the

 

letter “C” and the current call tone number

 

(01 through 10) is displayed.

Channel Buttons

 

The current setting (“01”

 

vibrate + ring, “02” vibrate

 

only or “03” ring only)

 

is displayed.

2.

Press the Channel Up or

 

Channel Down button to

 

change the call setting.

3. Choose one of the following:

VibrAlert® Only

Ring Only

Call Tone Setting

Channel Buttons

2.Press the Channel Up or Channel Down button to hear the other call tone settings.

3.Choose one of the following:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

a. Press the Mode button to enter the new setting

and proceed to other functions.

b. Press the Lock/Enter button to enter the new setting and return to Standby mode.

Roger Beep Confirmation Tone

•

Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.

Mode Button

To turn roger beep on or off:

 

1. Press the Mode button until the

 

Roger Beep icon flashes on the display.

 

The current on or off setting is displayed.

Roger Beep On

Channel Buttons

2.Press the Channel Up or Channel Down button to select roger beep on or off.

3.Choose one of the following:

a.Press the Mode button to enter

the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

22 English

Nothing Comes Close to a Cobra® 23

Page 14 Page 16
Image 15
Page 14 Page 16
Contents LI 3900DX Making Life Easier and Safer Features Product FeaturesEstimated operation time on full charge 10 hours Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Caring for Your microTALK RadioUsing Your Radio Channels To select a channel Selectable HighLow Power OutputTo toggle between high and low power Listening for a Response When you are finished talkingAuto Squelch/Maximum Range Signal Strength Signal Strength MeterLock Feature To turn the lock feature on or offSet Ctcss Privacy Codes Mode FunctionsScrolling through Mode Functions Privacy CodesTo select a DCS privacy code To turn VOX mode on or offStandby mode Set DCS Privacy CodesTo program a memory location Memory LocationsWhile de-programming a memory location To recall a stored memory channel locationWhile recalling a stored memory location To de-program a memory locationChannel Scan To scan channelsFlash on the display To scan privacy codes Privacy Code ScanNumber flash on the display Press the Mode button to proceed to other functionsMemory Location Scan To scan memory locationsPress the Mode button until Call Tone SettingsTo change call settings To change a call tone settingKeystroke Tones Mode Functions General SpecificationsMode Button To change keystroke tones General SpecificationsProduct Service Questions FCC License Product ServiceTrademark Acknowledgement Warranty and Trademark AcknowledgementCobra line of quality products includes
Top Page Image Contents