Cobra Electronics PR5000DX owner manual Lock/Mode Button To de-program a memory location

Page 11

Mode Functions

Operation

7. Choose one of the following:

a. Press the Hi•Low/Enter button to enter

the channel/privacy code in the selected

memory location and return to Step 1

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

Lock/Mode Button To de-program a memory location:

1. Press the Lock/Mode button until the Memory icon and the memory location flash on the display.

to program another memory location.

b. Press the Lock/Mode button to

enter the channel/privacy code in

the selected memory location and

proceed to other functions on the

channel/privacy code displayed

before you entered mode functions.

c. Press the Talk button to enter the

channel/privacy code in the selected

memory location and exit mode functions.

Upon release of the Talk button, the

radio will enter Standby mode on the

channel/privacy code just entered.

Lock/Mode Button To recall a stored memory channel location:

1. Press the Lock/Mode button until the Memory

icon and the memory location number flash on the display.

Memory Icon

Channel Buttons

Hi•Low/Enter Button

Channel 0

2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.

Press the Hi•Low/Enter button. The channel

 

numbers will flash on the display.

4.

Press the Channel Up or Channel Down

 

button to select Channel 0.

5.

Choose one of the following:

 

a. Press the Hi•Low/Enter button to enter

 

the channel/privacy code in the selected

 

memory location and return to the

 

beginning of memory location options.

 

b. Press the Lock/Mode button to

Memory Icon

Channel Buttons

2.Press the Channel Up or Channel Down button to select a memory location

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Talk button to return to Standby mode on the selected memory location.

A memory location can be reprogrammed at any time it is displayed. Press the Hi•Low/Enter button to begin.

While recalling a stored memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

enter the channel/privacy code in

the selected memory location and

proceed to other functions on the

channel/privacy code displayed

before you entered mode functions.

While de-programming a memory location,

if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

 

 

 

 

14 English

Nothing Comes Close to a Cobra® 15

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PR5000DX Questions Making Life Easier and SaferAutomated Help Desk Customer Assistance OperatorsFeatures Product FeaturesEstimated operation time on full charge 15 hours Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Caring for Your microTALK RadioTurning on Your microTALK Radio To turn on your radio Using Your RadioAuto Battery Save For charging microTALK radios in desktop chargerCall Button Listening for a Response When you are finished talkingVolume To adjust the volume Communicating with Another Person To talk to another personTo turn the lock feature on or off HiLow/Enter Button Selectable HighLow Power OutputTo toggle between high and low power Lock FeatureLock/Mode HiLow Power/EnterSignal Strength Signal Strength Meter Dual Function ButtonsTo select a privacy code Mode FunctionsScrolling through Mode Functions Ctcss Privacy CodesMemory Locations To turn VOX mode on or offOr off setting is displayed Voice Activated Transmit VOXLock/Mode Button To recall a stored memory channel location Lock/Mode Button To de-program a memory locationIf you press the Talk button while scanning, but more than Channel ScanYour microTALK radio can automatically scan channels To scan privacy codes Privacy Code ScanPress and hold the Talk button to communicate on Press the Lock/Mode button to proceed to other functions Memory Location ScanTo scan memory locations To change keystroke tones Call Tone SettingsLock/Mode Button To change a call tone setting Keystroke TonesGeneral Specifications General Specifications FCC LicenseYour new Cobra product, or if you are missing parts… Product Service WarrantyProduct Service Questions If you have any questions about operation or installingTrademark Acknowledgement Trademark AcknowledgementCobra line of quality products includes
Top Page Image Contents