Using Your Radio
Operation
Introduction
|
|
|
Operation | Customer Assistance | Warranty |
Talk Button
Communicating with Another Person • To talk to another person:
Listening
Listening for a Response
When you are finished talking:
•
Two Inches (five cm) from Mouth
1.Press and hold the Talk button.
2.With the microphone about two inches (five cm) from your mouth, speak in a normal voice.
3.Release the Talk button when you are finished talking and listen for a response.
You cannot receive incoming calls while pressing the Talk button.
Both radios must be tuned to the same channel/privacy code to communicate.
Volume Knob
Call Button
Release the Talk button to receive incoming transmissions. Your microTALK® radio is always in Standby mode while the Talk or Call buttons are not pressed.
Volume
•
To adjust the volume:
Rotate the On/Off Volume knob.
Call Button
•
To alert another person that you are calling: Press and release the Call button.
Channel Buttons
Channel Number
Channels
•
To select a channel:
With the radio on, select any of the
22 channels by pressing the Channel Up or Channel Down button.
Both radios must be tuned to the same channel to communicate.
Channels 1 through 7 are shared by FRS and GMRS. Channels 8 through 14 are FRS only. Channels 15 through 22 are GMRS only.
See page 24 for FRS/GMRS frequency allocations and compatibility charts.
The other person will hear a two second call tone. This tone is used only to establish voice communications.
See page 22 on how to select from 10 available call tone settings.
|
|
|
4 English | Nothing Comes Close to a Cobra® 5 | |