MODE FUNCTIONS |
|
OPERATION | English |
To Turn Dual Watch On:
NOTE: Dual Watch Location 2 must be programmed to turn Dual Watch on.
1. Set the first Dual Watch Location (channel/privacy
code) you wish to monitor (see “Channels,” “CTCSS Privacy Codes” and “DCS
Privacy Codes” sections for further details).
2. Press the MODE button until | Mode Button |
the Dual Watch icon and the |
|
channel number flash on |
|
the display. |
|
NOTE: While setting Dual
Watch, if you do not press any buttons for 15 seconds your radio will automatically return to LISTENING MODE on the last channel or channel/privacy code displayed before you entered Mode Functions.
3. Press the LOCK button |
|
to engage DUAL WATCH | Lock Button |
MODE. |
|
During Dual Watch (while not receiving a transmission), You Can Choose From The Following:
a. Press and hold the TALK button to communicate on either Dual Watch Location 1 or the last Dual Watch Location on which, during Dual Watch, you last received a transmission. This will return the radio to
LISTENING MODE.
b. Press the MODE button to proceed to other functions.
c. Press the LOCK button to return to LISTENING MODE on either Dual Watch Location 1 or the last Dual Watch Location on which, during Dual Watch, you last received a transmission.
To Terminate Dual Watch:
Choose one of the following:
a. Press the LOCK button to return to LISTENING MODE on either Dual Watch Location 1 or the last Dual Watch Location on which, during Dual Watch, you last received a transmission.
b. Press the TALK button to return to LISTENING MODE on either Dual Watch Location 1 or the last Dual Watch Location on which, during Dual Watch, you last received a transmission.
c. Press the MODE button and proceed to the next available Mode Function.
During An Incoming Transmission, You Can Choose From The Following:
a. Press and hold the TALK button to communicate on that Dual Watch Location. Your radio will remain on that Dual Watch Location and return to LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN button to resume Dual Watch.
If you press the TALK button while in Dual Watch and not within 10 seconds of receiving a
Baby Monitor
With the Baby Monitor Function on, a radio left near a baby will transmit to another unit on the same channel and privacy code whenever a sound is detected. Baby Monitor uses the same sensitivity level you set for the VOX Function. If you have not set a VOX sensitivity level (see the “Voice Activated Transmit [VOX]” section of this manual), the maximum sensitivity, level 5, will automatically be used.
transmission, you will transmit on the last Dual Watch Location on which you received a transmission. This will return the radio to
LISTENING MODE.
If you do not press any button within 10 seconds, your radio will automatically resume
Dual Watch.
To Turn Baby Monitor On:
1.Press MODE button until the Baby Monitor icon flashes on the display. The current Off setting is displayed.
2.Press the CHANNEL UP or CHANNEL DOWN button to change the setting to On.
3.Press the LOCK button to enter the On setting and enter BABY MONITOR MODE.
NOTES: Pressing the MODE button will enter the Baby Monitor Mode setting as Off and proceed to other Mode Functions.
Mode Button
Select Baby Monitor
Channel Buttons
Lock Button