MODE FUNCTIONS |
|
OPERATION | English |
3. When your desired privacy code is displayed, |
choose one of the following: |
a. Press the MODE button to enter the new |
setting and proceed to other functions. |
b. Press the LOCK button to enter the new |
setting and return to LISTENING MODE. |
Channel Scan
Your microTALK® radio can automatically scan channels (1 to 8).
NOTE: The radio ignores specific CTCSS or DCS privacy codes while scanning channels.
c. Do not press any buttons for 15 seconds to |
enter the new setting and return to |
LISTENING MODE. |
Voice Activated Transmit (VOX)
In VOX Mode, your microTALK® radio can be used
To Turn VOX Mode On | Mode Button | |
| ||
or Off: |
| |
1. Press the MODE button until |
| |
the VOX icon flashes on the |
| |
display. The current On or | Select VOX | |
Off setting is displayed. | ||
|
To Scan Channels:
1.Press the MODE button until the Scan icon and the channel number flash on the display.
2.Press the CHANNEL UP or CHANNEL DOWN button to begin scanning channels.
The Scan icon will continue to be displayed when channel scan is On. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds.
Mode Button
Select Scan Channels
Channel Buttons
2. | Press the CHANNEL UP or |
|
| CHANNEL DOWN button to |
|
| turn VOX On or Off. |
|
3. | When your desired VOX | Channel Buttons |
| Mode setting is displayed, |
|
| choose one of the |
|
| following: |
|
While setting channel scan, if you do not press any buttons for 15 seconds your radio will automatically return to LISTENING MODE on the channel or channel/privacy code displayed before you entered Mode Functions.
a. Press the MODE button to enter the new setting and proceed to other functions.
b. Press the LOCK button to enter the new setting and return to LISTENING MODE.
c. Do not press any buttons for 15 seconds to enter the new setting and return to
LISTENING MODE.
To Set the VOX Sensitivity Level:
1. Press the MODE button until | Mode Button |
the VOX icon flashes and |
|
the current sensitivity level |
|
is displayed. |
|
The current sensitivity level is |
|
displayed with the letter “L” | Select VOX |
and a number 1 to 5, 5 being | Sensitivity Level |
| |
the most sensitive level and 1 |
|
being the least sensitive level. |
|
2. Press the CHANNEL UP or |
|
CHANNEL DOWN button to | Channel Buttons |
change the setting. |
|
3. When your desired VOX
sensitivity level is displayed, choose one of the
following:
a. Press the MODE button to enter the new setting and proceed to other functions.
b. Press the LOCK button to enter the new setting and return to LISTENING MODE.
c. Do not press any buttons for 15 seconds to enter the new setting and return to
LISTENING MODE.
During An Incoming Transmission, You Can Choose From The Following:
a. Press and hold the TALK button to communicate on that channel. Your radio will remain on that channel and return to
LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning channels.
If you press the TALK button while scanning and not within 10 seconds of receiving a transmission, you will transmit on the channel on which you last received a transmission. This will return the radio to LISTENING MODE.
If you do not press any button within 10 seconds, your radio will automatically resume scanning channels.
During Scanning (while not receiving a transmission), You Can Choose From The Following:
a. Press and hold the TALK button to communicate on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel on which, during scanning, you last received a transmission. This will return the radio to LISTENING MODE.
b. Press the MODE button to proceed to set privacy code on the channel that was either displayed before you entered Mode Functions on which, during scanning,you last received a transmission (see “CTCSS PrivacyCode Scan” or “DCS Privacy Code Scan” for furtherdetails).