Operation
Volume Knob
Using Your Radio
Volume
•
To adjust the volume:
1.Rotate the On/Off Volume knob.
|
|
|
|
|
|
| Introduction | Operation | Customer Assistance | Warranty |
|
Auto Squelch/Maximum Range
•
Your microTALK® radio is equipped with Auto Squelch, which automatically shuts off weak transmissions and unwanted noise due to terrain and conditions. This slightly reduces the Maximum
|
|
| Call Button | • |
Call Button |
|
| ||
| To alert another person that you are calling: | |||
|
|
|
| |
|
|
| 1. Press and release the Call button. |
|
|
|
| The other person will hear a two second |
|
|
|
| call tone. This tone is used only to establish |
|
|
|
| voice communications. |
|
|
|
| See page 18 on how to select from |
|
|
|
| 10 available call tone settings. |
|
Range at which signals can be heard.
You can turn off auto squelch to allow all signals to be received and extend the maximum range of your radio.
Light/Max Range | To briefly turn off auto squelch: |
| 1. Press the Light/Max Range button |
| for less than five seconds. |
| If you hear two beeps, you have turned |
| the maximum range extender on (see below). |
| To turn maximum range extender on: |
Enter/Hi•Low Button
Hi Power Icon
Selectable High•Low Power Output
•
When in close proximity to another party or during favorable conditions, you can switch from High to Low Power to extend battery life.
This feature applies to GMRS Channels 1 through 7 and 15 through 22 only. Channels 8 through 14 operate exclusively on low power.
1. | Press and hold the Light/Max Range button |
| for at least five seconds until you hear |
| two beeps which indicates the maximum |
| range extender is on. |
To turn maximum range extender off: | |
1. | Press and release the Light/Max Range |
| button or change channels. |
Lock Feature
•
Low Power Icon | To toggle between high and low power: |
| |
| 1. Press and hold the Enter/Hi•Low button for |
The Lock feature locks the Channel, Mode/Lock and Enter/Hi•Low Power buttons to prevent accidental operation.
two seconds. |
When using Channels 1 through 7 and |
15 through 22 on high power, the Hi icon |
will be visible on the display. |
When using those channels on low power |
and on Channels 8 through 14, the Low icon |
will be visible on the display. |
Mode/Lock Button
Lock Mode
To turn the lock feature on or off:
1.Press and hold the Mode/Lock button for two seconds.
A double beep sound is used to confirm your lock on or off request. When in Lock mode, the Lock icon will be displayed.
Light/Max Range
4 English
Display Illumination
•
To illuminate your display:
1.Press and release the Light/Max Range button to illuminate the display for
10 seconds.
Nothing comes close to a Cobra® 5