Using the Mode button, Using VOX Mode | Cobra Electronics PR 955 DX

ENTER button

MODE button

TALK button

O P E R AT I O N • A D VA N C E D F E AT U R E S

ENGLISH

O P E R AT I O N

Using the MODE button

The MODE button allows you to use and program the various functions of your microTALK® radio. If you press and hold the MODE button, the LCD will cycle through the different functions.

3.Press and release the ENTER button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.

Setting the VOX

Sensitivity Level

Programming Memory

Locations

Your microTALK® radio has 10 memory locations (1-10) for storing your most frequently used channels and privacy codes. To program locations:

5. Press the MODE button again to store the main channel in memory and move to privacy code selection. The privacy code number begins flashing and the Memory

MODE button

You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. To set

the sensitivity:

1. Push the MODE

button until the

Memory icon and

the memory

location flashes.

MODE

button

icon continues to flash.

6. Select the privacy code (00-38) you

wish to store by pushing the CHANNEL

SELECT button up or down.

Using VOX Mode

1. Press the MODE

In VOX mode, your microTALK® can be used "hands-free," automatically transmitting when you speak. To turn VOX mode on and off:

1.Press the MODE button until the VOX icon flashes and the current setting ("on" or "off") is displayed.

2.Push the CHANNEL SELECT button up or down to turn VOX mode on or off.

CHANNEL SELECT button

button until the VOX

icon flashes and the number for the current sensitivity level is displayed

next to the letter L (level 5 = most sensitive, level 1 = least sensitive).

2.Push the CHANNEL SELECT button up or down to change the setting.

3.Press and release the ENTER button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.

ENTER button

MODE button

	2. Select the memory	CHANNEL
	location you wish	CHANNEL
	location you wish	SELECT
	to change by	button
	pushing the
	CHANNEL SELECT
	button up or down.

3.Press and release the MODE button again. The Memory icon and the main channel number will flash.

4.Select the main channel you wish to store by pushing the CHANNEL SELECT button up or down.

button to program

your selection. You may also press the

TALK button to

transmit your selected channel and privacy code, which will be stored into the memory location you are using. (NOTE: To “unprogram” a memory location you programmed previously, select 00 for both the main channel and privacy code in steps 4 through 6.)

8.Press and release the ENTER button to return to Standby mode at your new memory location, or press and release the

MODE button to save the memory location and proceed to other functions.