Cobra Electronics 650 manual DCS Privacy Code Scan, To Scan DCS Privacy Codes

Page 10

MOD E FUN CTIONS OPERATION

English

DCS Privacy Code Scan

Mode Button

You can automatically scan the DCS privacy codes (01 to 83) within one channel.

 

NOTE: The radio must be in the CTCSS OFF MODE when scrolling through mode functions or DCS

 

 

mode will be skipped.

 

To Scan DCS Privacy Codes:

 

1.

While in the LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the

Channel Buttons

 

channel on which you wish to scan the DCS privacy codes.

 

2.

Press the MODE button until the SCAN icon, DCS icon and the small numbers next to the channel

 

 

number flash on the display.

 

3.

Press the CHANNEL UP or CHANNEL DOWN button to begin scanning DCS privacy codes within the

 

 

channel you selected.

 

The scan icon will continue to be displayed when DCS privacy code scan is ON. Your radio will continue

to scan DCS privacy codes and stop when an incoming transmission is detected. The radio will remain on that channel/privacy code for 10 seconds.

Select Channel

Select Scan Privacy Codes

While setting DCS privacy code scan, if you do not press any buttons for 15 seconds, your radio will automatically return to LISTENING MODE on the channel/privacy code that was displayed before you entered more functions.

During Scanning (While Receiving an Incoming Transmission), You Can Choose from the Following:

a. Press and hold the TALK button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and return to LISTENING MODE.

b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning DCS privacy codes.

If you press the TALK button while scanning and not within 10 seconds of receiving a transmission, you will transmit on the channel/privacy code on which you last received a transmission. This will return the radio to LISTENING MODE.

During Scanning (While Not Receiving an Incoming Transmission), You Can Choose from the Following:

a. Press channel/privacy code that was displayed before you entered Mode Functions or channel/privacy code on which, during scanning, you last received a transmission. This will return the radio to the LISTENING MODE. Press and hold the TALK button to communicate on either the channel or channel MODE.

b. Press the MODE button to proceed to next available Mode Function.

c.Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entererd Mode Functions or the channel/privacy code on which, during scanning, you last received a transmission.

Image 10
Contents Two- Way Radio Model MT ENG LishProduct Features Battery/Power Saver Radio PowerBattery Low Indicator Oper Atio NCall Button To Adjust VolumeListening for a Response Lock FunctionAuto Squelch/Maximum Range Extender To Illuminate DisplayExternal Speaker/Microphone/Charge Jack Set Ctcss Privacy Code Scan Scrolling Through the Mode FunctionsMOD E FUN Ctions Operation Set Roger Beep On/OffVoice Activated Transmit VOX To Turn VOX Mode On or OffTo Select a DCS Privacy Code Your microTALK radio can automatically scan channels 1 to Channel ScanChannel Buttons To Set the VOX Sensitivity Level To Scan ChannelsTo Scan Privacy Codes Ctcss Privacy Code ScanOne 1 channel On which you wish to scan the Ctcss privacy codesChannel on which you wish to scan the DCS privacy codes DCS Privacy Code ScanTo Scan DCS Privacy Codes Number flash on the displayRoger Beep Confirmation Tone To Change a Call Tone SettingSet Call Tones To Turn Roger Beep On or OffDeclaration of Conformity Warranty & Customer ServiceC., Warra NTY & Customer SER VIC E Date 15 January