Cobra Electronics 650 manual Ctcss Privacy Code Scan, One 1 channel, To Scan Privacy Codes

Page 9

MOD E FUN CTIONS

OPERATION

English

Select Channel

Mode Button

CTCSS Privacy Code Scan

 

 

 

Your microTALK® radio can automatically scan the CTCSS privacy codes (01 to 38) within

 

 

 

one (1) channel.

 

 

 

To Scan Privacy Codes:

 

 

 

1.

While in LISTENING MODE, press the CHANNEL UP or CHANNEL DOWN button to choose the channel

Select Scan Privacy

Channel Buttons

 

on which you wish to scan the CTCSS privacy codes.

 

2.

Press the MODE button until the Scan icon, CTCSS icon and the small numbers flash on the display.

Codes

 

 

 

3.

Press the CHANNEL UP or CHANNEL DOWN button to begin scanning CTCSS privacy codes within the

 

 

 

channel you selected.

 

 

 

The Scan icon will continue to be displayed when CTCSS privacy code scan is On. Your radio will

 

continue to scan CTCSS privacy codes and stop as an incoming transmission is detected. Your radio will remain on that

channel/privacy code for 10 seconds.

 

 

 

 

While setting CTCSS privacy code scan, if you do not press any buttons for 15 seconds, your radio will automatically return to LISTENING MODE on the channel/privacy code that was displayed before you entered Mode Functions.

During An Incoming Transmission, You Can Choose From The Following:

a. Press and hold the TALK button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and return to LISTENING MODE.

b. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning CTCSS privacy codes.

If you press the TALK button while scanning and not within 10 seconds of receiving a transmission, you will transmit on the channel/privacy code on which you last received a transmission. This will return the radio to LISTENING MODE.

If you do not press any button within 10 seconds, your radio will automatically resume scanning CTCSS privacy codes.

During Scanning (while not receiving a transmission), You Can Choose From The Following:

a. Press and hold the TALK button to communicate on either the channel or channel/privacy code that was displayed before you entered Mode Functions or channel/privacy code on which, during scanning, you last received a transmission. This will return the radio to LISTENING MODE.

b. Press the MODE button to proceed to next available Mode Function.

c.Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel/privacy code on which, during scanning, you last received a transmission.

Image 9
Contents ENG Lish Two- Way Radio Model MTProduct Features Battery Low Indicator Radio PowerBattery/Power Saver Oper Atio NListening for a Response To Adjust VolumeCall Button Lock FunctionTo Illuminate Display Auto Squelch/Maximum Range ExtenderExternal Speaker/Microphone/Charge Jack MOD E FUN Ctions Operation Scrolling Through the Mode FunctionsSet Ctcss Privacy Code Scan Set Roger Beep On/OffTo Turn VOX Mode On or Off Voice Activated Transmit VOXTo Select a DCS Privacy Code Channel Buttons To Set the VOX Sensitivity Level Channel ScanYour microTALK radio can automatically scan channels 1 to To Scan ChannelsOne 1 channel Ctcss Privacy Code ScanTo Scan Privacy Codes On which you wish to scan the Ctcss privacy codesTo Scan DCS Privacy Codes DCS Privacy Code ScanChannel on which you wish to scan the DCS privacy codes Number flash on the displaySet Call Tones To Change a Call Tone SettingRoger Beep Confirmation Tone To Turn Roger Beep On or OffC., Warra NTY & Customer SER VIC E Warranty & Customer ServiceDeclaration of Conformity Date 15 January