Cobra Electronics 29 NW specifications Installation, Location, Mounting and Connection

Page 2

Installation

Installation

Location

Location

Plan location of transceiver and microphone bracket before starting the installation.

DATE OF	FCC ID:BBO3K229LTD	ANT
MFG :JUNE 98	FCC ID:BBO3K229LTD	ANT
	COBRA	PA.SP. EXT.SP.

Mounting and Connection

Note

Select a location that is convenient for operation, yet does not interfere with the driver or passenger.

The transceiver is usually mounted to the underside of the dash with the microphone bracket beside it.

Mounting and Connection

1 Hold the radio with the mounting bracket in

the exact desired location. If there is no

interference, remove the bracket and use it as

MADE IN CHINA

SERIAL NO.:806135776

PRECISION ENGINEERED PRODUCT OF

COBRA ELECTRONICS CORP. CHICAGO, ILL.60707

+ POWER–

The transceiver is held in the universal mounting bracket by two thumbscrews which allow for adjustment at a convenient angle.

The bracket includes two self-tapping screws and star washers. The mounting must be mechanically strong, conveniently located.

a template to mark the location for the

mounting screws.

2Drill the holes and secure the bracket.

3Connect the antenna cable plug to the receptacle marked “ANT” on the back of the unit.

continued

2

3

Image 2

Contents How to Use Your Cobra 29 NW Features of This ProductMounting and Connection InstallationLocation LocationMicrophone Connector CB Antenna Marine InstallationAntennas Ignition Noise Interference CB AntennaOperation Setting Channel SelectorSetting Channel Selector Turning OnCalibrate For SWR Standing Wave Ratio Calibrate for SWR Standing Wave RatioMeter Selecting a ChannelTo Receive Tone Hi/Nor RF Gain Control OFF Noise Blanker Automatic Noise Limiter SwitchNB-ANL/ANL/OFF Noise Blanker/Automatic Noise Limiter Switch Tone Hi/NorDimmer Switch Dimmer SwitchSetting Squelch Setting SquelchTransmit Setting DynamikeSetting Dynamike Select desired channelRF Meter Output outgoing signal while transmittingS/RF-SWR-CAL switch must be in the S/RF position RF MeterPA Public Address Set CB/PA switch to PA positionAdjust PA speaker volume with the Dynamike control PA Public AddressTemporary Mobile Set-Up Home And Office Set-Up Temporary Mobile Set-UpBase Station Operation From 120V AC House Current Base Station Operation From 120V AC House CurrentHow Your CB Can Serve You Few Rules You Should Know Channel Emergency MessagesCB 10-Codes CB 10-CodesFrequency Ranges NW Specifications Limited Two Year Warranty Optional Accessories Cobra Electronics CorporationMake Check or Money Order Payable To Optional Accessories Accessory Order InfoOrdering From U.S.A For Credit Card Orders To Order OnlineFCC Regulations If You Think You Need ServiceCB Story FCC WarningsCustomer Support Controls and Indicators Our Thanks to YouCobra Customer Service Back Side