Audiovox GMRS122CH manual Mode Button

Page 10

Up Channel/Volume Button (10)

In the standby mode, pressing this button will increment the listening volume. When in function edit mode this button will be used to adjust the unit’s settings.

Down Channel/Volume Button (11)

In the standby mode, pressing this button will decrement the listening volume. When in function edit mode this button will be used to adjust the unit’s settings.

MODE Button (12)

This button is used to select various feature settings in the GMRS and FRS modes.

External Speaker (SPK)/ Microphone (MIC)/CHG Jack (6)

This jack accepts both the optional Audiovox headset/microphone connector and the supplied wall charging adapter. For additional optional equipment and accessories for the GMRS122CH, visit the Audiovox web site at www.audiovox.com.

Scan Button (13)

With the unit in standby mode, press the Power On/Off Button momentarily to enable or disable the scan function; SCAN will appear on the display.

10

Image 10
Contents Model GMRS122CH Gmrs License Model GMRS122CH FCC License Required Model GMRS122CH Display HI LOPowering the transceiver Equipment and Accessories SuppliedOptional Accessories BatteriesInstalling the batteries Input 110VAC Output 7.5VDC On or ControlsMonitor/Display Backlight Button Mode Button GRMS/FRS Operation Channel SelectionCtcss Mode Sub-Channel Selection Transmit Power Selection Mode Gmrs Channels Only Roger Beep ToneCall Ringer Selection Mode VOX Selection ModeButton Beep Key Tone Channel Scan Operation Battery Alert Page Troubleshooting Problem Possible cause CorrectionTechnical Specifications Main Channel Frequencies Continuous Tone Coded Squelch System Tone Frequencies in Hz Freq. HzDAY Limited Warranty This page Left Blank Intentionally Audiovox Electronics Corp., Hauppauge, NY