To enable and disable the Roger Beep tone:
- From GMRS/FRS standby mode, press the MODE Button 4 times (in FRS mode, 3 times) until the flashing Roger Beep icon ( ) appears with On or oF.
-Press the Up or Down Button to select the tone on or off as desired.
-When enabled, the tone icon ( ) appears steady on the display.
-Press the PTT button momentarily to confirm selection.
VOX Selection Mode
This option enables you to have
To set the radio for VOX operation:
-From GMRS/FRS standby mode, press and hold the MODE button for 3 seconds, or until the VOX icon appears on the display.
-To terminate VOX operation, press and hold the MODE button for at least 3 seconds; the VOX indication will disappear.
Button Beep (Key Tone)
This feature allows the transceiver to sound a confirmation tone whenever the following keys are pressed: Power On/Off/SCAN Button, Up/Down But- tons and MODE Button. This feature is always on.
Call Ringer Selection Mode
The transceiver provides a transmit call ring melody at the receiving unit to alert you to an incoming call.
To activate the call ringer melody:
-From GMRS/FRS standby mode, press the PTT button twice in quick succession; a call ring melody will sound at the receiving unit to alert the user to an incoming transmission, provided that unit is equipped with this capability and set to the same channel.
14