Audiovox GMRS1262 owner manual Installing the batteries

Page 8

3.Various Brands of Rechargeable Batteries - Use of the Audiovox charger with other brands of rechargeable batteries is not recommended, as battery charging times will vary with different brands of batteries. Refer to the manufacturer’s instructions for charging other brands of batteries.

Installing the batteries:

Battery installation is made more convenient when the carry clip is removed. To do this, release the spring latch securing the clip to radio and slide the clip downward and away from the radio body. Next, press down with the thumb at the embossed arrow, slide the battery cover down and lift off the battery cover. Insert five AAA batteries (alternate positive ends (+) toward the right side of the transceiver (starting top-to- bottom).

RELEASE

BUTTON

CARRY

CLIP

BATTERY

COVER

8

COVER

ARROW

+

+POSITIVE

+TERMINALS

128-7623

8 of 28

Image 8
Contents Model GMRS1262 This page Left Blank Intentionally Safety Information PerformanceBattery Care Battery DisposalModel GMRS1262 FCC License Required Model GMRS1262 Display Powering the transceiver BatteriesInstalling the batteries 128-7623 LED Flashlight Button Power On/Off/Keylock 13 ButtonAdjusting the Volume 10 Push To Talk PTT Button Up Channel/Volume ButtonMonitor/Display Backlight Button Mode/WB Button Down Channel/Volume ButtonGmrs Operation Ctcss Mode Sub-Channel Selection Channel SelectionTransmit Power Selection Mode Dual Watch Mode VOX Sensitivity Level SelectionKey Tone Roger Beep ToneCall Ringer Selection Mode Channel Scan OperationWeather Band Operation Channel Selection Auto Key Lock Selection ModeVOX Enable Operation Weather Alert Mode Battery Alert 128-7623 Troubleshooting Power Supply GeneralReceiver TransmitterMain Channel Frequencies Available Weather Channel Frequencies Freq. MHz Continuous Tone Coded Squelch System Tone Frequencies in HzFreq. Hz DAY Limited Warranty Audiovox Electronics Corp., Hauppauge, NY 128-7623