Audiovox GMRSWP1 owner manual Button Confirmation Tone, To Transmit, To Receive, Monitor Function

Button Confirmation Tone

Whenever the VOL/Channel Up/Down or MON/FM buttons are pressed, the speaker will sound a beep tone to confirm each press. In addition, when the Channel (CH) button is pressed, a confirming tone melody sounds.

To Transmit:

1.Set the desired primary channel.

2.Press and hold the headset Push-to-Talk (PTT) button while speaking slowly and clearly in a normal voice into the headset microphone.

3.The LCD backlight will come on while transmitting.

4.Release the PTT button when you finish speaking to receive incoming signals.

To Receive:

1.Set the desired channel.

2.Adjust the volume control to the desired listening volume by using the up and down buttons.

3.The transceiver will play strong received signals through through the head- set.

Monitor Function:

The Monitor (MON) button can be used to play all signals present on a channel. This is useful when communicating with other parties at extreme range. The monitor function is accessed when the MON button is momentarily pressed.

-12-

128-6739

12 of 16