Audiovox 1525 owner manual Ctcss Mode Display, VOX Selection Mode

transmission. This will only allow you to ignore all traffic on a given channel not using the same subcode.

CTCSS Mode Display

This feature allows you to display the CTCSS tone in either a channel num- ber or frequency.

To change the display of the CTCSS tone to either a channel number or frequency,

-Turn on the transceiver ON while pressing the Mode Button. -Press the Mode Button until (tccode or tcfreq) appears.

-Press the Up Button or Down Button to select the code number display or the frequency number display.

- Press the PTT Button to confirm your selection.

VOX Selection Mode

This option enables you to have hands-free conversation. Your voice or the signal is detected and the radio transmits without the need to press the PTT button.

To set radio for VOX operation,

-Rotate the volume control counterclockwise to turn power OFF.

-Press and hold PTT Button.

-Rotate the volume control clockwise to turn power ON.

To set the VOX sensitivity level,

-Press the Mode Button until the VOX icon flashes and (Vo _ _) appears in LCD Panel.

-Press the Up Button or Down Button to select from 01 - 10 Voice Levels with 01 being the least sensitive and 10 being the most sensitive.

-The 01-10 Level setting determines VOX response sensitivity.

-Press the PTT Button to confirm your selection.

12