Audiovox 1525 owner manual Spring Clip Belt Clip Battery Cover Battery Cover Latch

Page 6

SPRING CLIP

BELT CLIP

BATTERY COVER

BATTERY COVER LATCH

SIZE

AAA

AAA

SIZE

ALL FOUR BATTERIES POSITIVE (+)

SIDE

1. Using

fingernail

2. Lift the bottom of the

press battery cover

cover and then

slide

latch

down and

the battery

cover

open.

 

downward.

 

3.Insert four AAA batteries (all four positive ends (+) toward the bottom of the transceiver) or insert the rechargeable batteries.

The following guidelines will improve performance and provide longer operating times for the GMRS-1525:

1.Do not mix old and new batteries.

2.The use of alkaline-type batteries is recommended to provide the longest operating time.

3.Do not mix alkaline, standard (carbon-zinc) or rechargeable (Ni-MH) batteries.

4.If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and will void the warranty.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model/ModèleGMRS-1525 Manuel dutilisation Place the Rubber Covers on Jacks When not in USE Model GMRS-1525 FCC License Required Model GMRS-1525 Display Gmrs License Powering the transceiver Installing the batteriesSpring Clip Belt Clip Battery Cover Battery Cover Latch Charging the GMRS-1525 Controls Up Button Operation Channel SelectionCtcss Mode Sub Channel Selection Ctcss Mode Display VOX Selection ModeAuto Channel Scan List Selection Mode Scan OperationBusy Channel Lock Out Bclo Selection Mode Key ToneSquelch Level Priority Scan Channel Selection Mode Auto Key Lock Selection ModeCall Ringer Selection Mode Time Out Timer TOT Selection ModeEmergency Channel Mode Troubleshooting Battery PacksAdditional Functions Not on Technical Specifications Page Main Channel Frequencies Channel Freq. MHzContinuous Tone Coded Squelch System Tone Frequencies in Hz Freq. HzDAY Limited Warranty Audiovox Corporation, Hauppauge, N.Y
Top Page Image Contents