Audiovox GMRS2VMK manual Using the Fast Intelligent Charger

Page 10

Using the Fast Intelligent Charger

The Fast Intelligent Charger will typically fully charge the transceivers in two hours. LEDs mounted on the front of the charger provide visual status of the charging process.

Charging Indicators

Status

Steady Yellow:

The charging process is not taking place.

Charging will not occur at temperatures below

14 degrees Fahrenheit (-10 degrees Celsius)

or above 140 degrees Fahrenheit (60 degrees

Celsius).

Blinking Red:

The charging process is not taking place. The

batteries need to be replaced.

Steady Red:

Charging in progress.

NOTE: Observe the charging LED indicators after one

minute to ensure that charging is taking place.

If charging LEDs are blinking, replace the

batteries.

Steady Green:

Batteries are fully charged.

CHARGING LED INDICATORS

Image 10

Contents Model GMRS2VMK Page Features 13REF 111 9REFGMRS2VMK Display Powering the transceiver BatteriesInstalling the batteries Mounting the Charger Where to Install the Charger Using the Fast Intelligent Charger Powering the Charger with the Cigarette Lighter Adapter Mounting the Transceiver in the Charger GMRS2VMK Operational Modes Monitor/Display Backlight Button Up Channel/Volume Button Gmrs Operation Channel SelectionCtcss Mode Sub-Channel Selection Transmit Power Selection Mode VOX Selection ModeDual Watch Mode Roger Beep ToneKey Tone Call Ringer Selection ModeCaller Identification ID Select Auto Key Lock Selection Mode Channel Scan OperationBattery Alert Emergency and Assistance Channel ModeOut of Range Indication Page Troubleshooting Technical Specifications Main Channel Frequencies Continuous Tone Coded Squelch System Tone Frequencies in Hz Freq. HzDAY Limited Warranty