Mounting the Transceiver in the Charger
The transceiver is designed to lock into the Fast Intelligent Charger. Use the following procedure:
1.While holding the transceiver in the palm of your hand, reach the carry clip handle and press down to open the carry clip.
2.While the carry clip is in the open position, move the transceiver downward into the charger base.
3.Press the transceiver firmly into the base.
4.Release the carry clip handle and ensure that the transceiver is secure by lightly pulling up on the unit. The unit should be locked to the charger base and the charging indicator should be red.
Carry Clip Spring Latch
Carry Clip Handle
Carry Clip Part Number
2VMKBLT
Carry Clip
Locking Tab
GMRS2VMKCHG Fast
Intelligent Charger
Side View
12