Battery Installation
1a |
1b |
1c |
4 “AAA” alkaline batteries |
1.(a) Lift the tab of the belt clip while
(b)pushing the clip up to remove it.
(c)Pull lock tab down and lift door up (towards you) to remove battery cover.
2.Insert four “AAA” batteries. Position batteries according to polarity markings. Reverse the steps in “1” to
Note : • Make sure the battery + and - terminals are aligned as shown above.
• When batteries are low or need charging the BATTERY
LOW 
will blink. Replace all batteries with new alkaline batteries.
2
To Turn On The Unit or To Turn Off The Unit
Press the POWER switch for more than 1 second.
Auto Battery Power Saver
The unit has a special circuit designed to extend battery life. If there are no transmissions within 3 seconds, the unit will automatically switch to battery save mode. The Power Saver Mode LED(Red) will flash.
Low Battery Indicator
When battery level becomes low, 
appears on the LED display and flashes. Replace all four batteries with new ones.
To Transmit
Simply talk to the
To Adjust VOLUME control
Press momentarily UP button to increase or DOWN button to decrease volume.
The higher number (16), the higher volume level.
To Select Main Channel
1.Press the MENU button. The LED display indicates a flashing number.
2.Press the UP or DOWN button to set a desired channel from 1 to 14.
3.Press the ENTER button.
Monitor
The Monitor function
3