Wall Mounting the Base
This phone can be mounted on any standard wall plate.
1) | Remove the wall mount adapter from the base and snap it |
|
| into the notches on the bottom of the base. |
|
2) | Plug the AC adapter to the DC IN 9V jack. |
|
| CAUTION: To avoid risk of fire and shock, only use the |
|
| Uniden |
|
3) | Route the AC adapter cord inside the molded wiring channel as |
|
| shown. |
|
4) | Plug the AC adapter into a standard 120V AC wall outlet. |
|
5) | Plug the telephone cord into the phone jack. |
|
6) | Route the telephone cord inside the molded wiring channel as |
|
| shown. |
|
7) | Plug the telephone cord into the telephone outlet. |
|
8) | Align the mounting slots on the base with the mounting posts on |
|
| the wall. Then push in and down until he phone is firmly seated. |
|
9) | On the base unit, pull the handset retainer out of the slot. |
|
| Rotate it clockwise 180 degrees. |
|
10)Flip the retainer from front to back. Slide it back into the slot |
| |
| so that the lip of the retainer is up and the oval is down. The |
|
| retainer holds the handset in place. |
|
[15] INSTALLING THE PHONE | w w w . u n i d e n . c o m | |