Uniden CEZAI998 manual Liquid Damage, Cordless Handset Base

Page 62

Liquid Damage

Moisture and liquid can damage your cordless phone.

If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.

If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below:

 

Cordless Handset

 

Base

1)

Remove the battery cover and leave it off for

1)

Disconnect the AC adapter from the base, cutting

 

ventilation.

 

off electrical power.

2)

Disconnect the battery pack. Leave the battery

2)

Disconnect the telephone cord from the base.

 

cover off and the battery pack disconnected for at

 

 

 

 

least 3 days.

3)

Let dry for at least 3 days.

3)

Once the handset is completely dry, reconnect the

 

 

 

battery pack and the battery cover.

 

 

4)

Recharge the handset's battery pack for 15 to 20

 

 

 

hours before using.

 

 

 

 

 

 

IMPORTANT:

You must unplug the telephone line while recharging the battery packs to avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline. Please see the back cover page for contact information.

[61] TROUBLESHOOTING

w w w . u n i d e n . c o m

Image 62
Contents Cezai Contents Using Your Answering Machine Using Caller ID and Call WaitingSetting Up the Answering Machine MaintenanceWelcome AccessibilityWELCOME/ACCESSIBILITY Cidcw TerminologyCID TerminologyProduct Overview Main Phone FeaturesAnswering Machine Features Product OverviewParts of the Base and Corded Handset Top viewSide and Rear view Visual ringer hi/lo/off switchCID Announce on/off switch Delete/channel key Select/intercom key Audio boost on/off switchParts of the Cordless Handset Parts of the Cordless Handset Charging Cradle Using the Handset Menus Using the InterfaceUsing the Base Menus Using the InterfaceChoosing the Best Location Installing the PhoneInstalling the Phone Connecting the Base and Corded Handset Testing the Connection Changing the Dial ModeAdjusting the Visual Ringer Brightness Turning CID Announce On/OffWall Mounting the Base Direct Wall Mounting Connecting the Cordless Handset and Charger Installing the Beltclip Installing the Optional HeadsetBase Setup Base SetupSetting the Day and Time Adjusting the Base Display LCD Contrast Setting the Area CodeHandset Setup Handset SetupSetting Caller ID on Call Waiting Cidcw Selecting a Language for the Handset DisplaySetting AutoTalk Checking the Area Code Setting from the HandsetEmergency Dialing From the Base & Cordless Handset Emergency Dialing from the Base & Cordless HandsetOne-touch Speed Dialing from the Base ONE-TOUCH Speed Dialing from the BaseSpeed Dialing from the Cordless Handset Speed Dialing from the Cordless HandsetStoring Names and Numbers for Speed Dialing If you make a mistake while entering a name Number of times key is pressed Storing Caller ID Information to Speed Dial Locations Press memoryUsing Your Phone Using Your PhoneDuring a Power Failure Receiving a Making and Receiving CallsMaking a Call Hanging UpTo cancel speed dialing Easy dialingCall Waiting Making a Call from a Caller ID ListingRedialing the Last Number Dialed Press redial/pauseAdjusting the Handset Ring Tone and Volume Adjusting the Ringer, Earpiece and Speaker VolumeAdjusting the Base Ringer Temporarily Muting the Base Ringer Adjusting the Earpiece and Speaker VolumeAudio Boost for the Cordless Handset Placing a Call on Hold from the Base Selecting a Different ChannelFinding the Lost Handset Conference ConferencingJoining a Conference Call ExitingMaking an Intercom Intercom To cancelIntercom IntercomTransferring a Call Answering and Hanging up an IntercomTone Dialing Switch Over Cordless Handset Using Caller ID and Call WaitingUsing Caller ID and Call Waiting Using the CID Announce Base Only Viewing Caller ID InformationDeleting Information from the Caller ID List To Delete the entire Caller ID List Setting UP the Answering Machine Setting Up the Answering MachineFeatures Selecting a LanguageSetting the Record Time or Announce Only Activating Call ScreeningSetting the Number of Rings Activating the Message AlertSetting Your Greeting To Record a Personal GreetingSelecting Your Greeting Turning your Answering System On & Off Using Your Answering MachineUsing Your Answering Machine Turning On Turning OffReviewing Messages MessagesScreening Calls Remotely Operating Your Answering MachineUsing Your Answering Machine Power Failure MaintenanceSpecifications MaintenanceBattery Replacement and Handling Battery LifeLow battery alert Installing the Rechargeable Battery for Cordless Handset Cleaning the Battery Charging Contacts Symptom Suggestion Troubleshooting Common Issues TroubleshootingTroubleshooting Troubleshooting Liquid Damage Cordless Handset BasePrecautions PrecautionsRechargeable Nickel-Cadmium Battery Warning Important Safety Instructions FCC Wants You To Know Precautions Radio Interference Cordless Telephone PrivacyTerminal Equipment Radio EquipmentOne Year Limited Warranty ONE Year Limited WarrantyW . u n i d e n . c o m K, L IndexF, G, H X, Y, ZMemo Remote Operation Card Memory Location MemoTask Key TTY Z Z 0 1 0 5 6 Z Z