Editing Phonebook Entries
) Press [
] to open.
2)Use [
] or [
] on the
3)Move the cursor to select EDIT SELECTION submenu. Press the OK soft key.
4)Follow the steps for Creating Phonebook Entries on page 27. If you do not wish to change the information at any step, simply press the OK soft key to go to the next step.
Storing Caller ID or Redial Numbers in the Phonebook
You can store Caller ID or redial numbers in the phonebook so you can use them later. Go to the Caller ID or redial list and select the number you want to store. (If the Caller ID information did not include the number, then you will not be able to store it.)
) When the phone is in standby, press [ 
] (on the right side of the
2)Use [
] or [
] on the
3)Move the cursor to select NEW ENTRY or STORE & EDIT to add to an existing phonebook location. Press the OK soft key..
For the additional phone number, if the phone location is already full, THIS PERSON’S PHONE NUMBER MEMORY IS FULL. appears in the display. The number will not be stored.
Follow the steps for Creating Phonebook Entries on page 27.
Note: If the Caller ID message was received as a private or unknown number, or the message does not have the number, you cannot store the message in the phonebook. If it was received as private or unknown name, the message will be stored as <NO NAME>.
29