Programming Your Phone
All programming functions must be completed when your phone is in the standby mode because programming keys do not function while you are on the phone.
Storing a Number in Memory
Use these keys to store a number in memory.
Note: An error tone will sound and the programming procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step.
1.Remove the handset from the base.
2.Press M.
The talk/batt low LED blinks.
3.Enter the number you want to store (up to 16 digits).
5551212
4.If a pause is needed during dialing to access a long distance service, press P.
9P555
1212
Note: The Pbutton counts as one digit.
Pressing Pmore than once increases the length of the pause between numbers.
5.Press M again.
6.Enter the memory location
A tone indicates that the number is stored.
Storing a Mixed Number
If your phone is set up for pulse dialing, you can store a mixed mode number so that you can easily access long distance services.
Use these keys to store a mixed mode number in memory.
Note: An error tone will sound and the programming procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step.
1.Remove handset from the base.
2.Press M.
The talk/batt low LED blinks.
3.Enter the number to be dialed in pulse mode.
5551212
4.Press 
on the handset.
5. Enter the number to be dialed in tone mode.
3300
6.If a pause is needed during dialing to access a long distance service, press P.
P3300
Note: The P button counts as one digit.
Pressing P more than once increases the length of the pause between numbers.
7.Press M again.
8.Enter the memory location
A tone indicates that the number is stored.
Dialing a Stored Number
To dial a number previously stored in memory, follow these steps:
1.Remove the handset from the base.
2.Press T.
3.Press M.
4.Press the memory location number
Chain Dialing
On certain occasions, after dialing a number, you may be requested by the party or service you are calling to enter a special access code, such as when performing a banking transaction. To do this, follow these steps:
1.Store the access code into one of the memory numbers.
2.Dial the main number.
3.At the appropriate time, press M followed by the memory location number where the access code is saved.
Erasing a Stored Number
To erase a number previously stored in a memory location
1.Remove the handset from the base.
2.Press M twice.
3.Press the memory location number
Note: An error tone will sound and the erase procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step.
10