Uniden XC800 manual Using Your Phone, Making and Receiving Calls

Using Your Phone

Making and Receiving Calls

The following features of the XC800 Series phones are different depending on the handset’s location when you make or receive a call.

		Handset On Base		Handset Off Base
Answer Call	Pick up handset		Press T.
	(AutoTalk).
	1)	Pick up handset.	1)	Press T.
Make Call	2)	Press T.	2)	Listen for dial tone.
	3)	Listen for dial tone.	3)	Dial the number.
	4)	Dial the number.
Hang up,	Return handset to base		Press T.
	(AutoStandby).
	1)	Pick up handset.	1)	Press T.
Redial,	2)	Press T.	2)	Listen for dial tone.
	3)	Listen for dial tone.	3)	Press F.
	4)	Press F.

Note: Sometimes when you press Tto hang up the phone, you may get an error tone and the phone will not disconnect. If this happens, place the handset on the base or press Tagain while holding the handset close to the base.

Changing Channels, Flash, and Page/Find

To change channels or access call waiting while the phone is in use, or to use the one-way page to locate the handset, follow these steps:

	Press These Keys	You Will Hear
	Press C.	A click similar to when
Changing	Note: Change	Cis pressed. There
Channels	channels to help	may be a brief pause as
	eliminate background	your phone searches for
	noise.	a clear channel.
	If the call waiting tone	A click, a short pause,
FLASH	sounds, press Fto	then the caller (if you
	accept the waiting call.	were on a call).
	Press page/find on the	The handset beeps
Page/Find	base to locate the	about 15 times.
	handset.

9