Dect 1802 Qk 7/19/02 3:45 PM Page 10
ADVANCED FUNCTIONS
BASE STATION REGISTRATION KEY
Press and hold the Base Station key for five seconds. The Talk LED on the
Base Station will flash to indicate that it is in registration mode. The user then has 90 seconds to complete the handset registration procedure.
An unregistered Handset shows the display shown below:
_ _ _
Press then .
The available Base Station numbers (1 to 4) are displayed.
1 2 3 4
If the handset is already registered onto a Base Station, then the number of the Base Station will flash. If you have more than one Base Station and are registering the handset onto a second Base Station, then you should select the first number that is not flashing.
Select the first available Base Station number.
As confirmation, the user is prompted for the System PIN number.
- - - -
The default System PIN (the PIN that the unit arrives with) is 1111 (see page 8 )
Press the 4 Digit Pin number (default )
6