Installing the Battery
Use only the Uniden
Locate the battery | Line up the red and black |
pack, battery cover | wires on the battery pack |
and the handset. | connector with the sticker in |
Battery | the handset’s battery |
compartment. | |
pack |
|
Battery |
|
cover |
|
Handset
Push the battery pack connector in firmly. (You should hear it click into place.) Gently tug on the battery wires to make sure the connection is secure.
Place the cover over the battery compartment and slide it up into place.
Installing the Belt Clip
Insert the tabs on the sides of the belt clip into the holes on either side of the handset. Press the belt clip down until it clicks into place. (Tug on the clip to make sure it’s secure.)
To remove the belt clip, gently pull the tabs out of the holes, then slide the belt clip off of the handset.