Making a Call from the Phonebook
1.When the phone is in standby, press [
] to open the phonebook.
.Move the cursor to select DIAL/EDIT, and then press 
.
3.Find the phonebook entry you want to call (see Finding a Phonebook Entry on page 24).
4.Press [
/flash] or [
] on the handset to dial the number.
Note: You can also press [ /flash] before you open the phonebook. When you come to the phone number
you want to dial, press 
.
Chain Dialing from the Phonebook
You can use the phonebook entries to store a group of numbers (up to 20 digits) that you may need to enter once your call connects. Once the call has connected you will then do the following.
1.Press [
].
.Use [
] and [
] to select the phonebook entry you want to dial.
3.Press 
Making a Call with Speed Dial
1.When the phone is in standby, press and hold the number key ([0] - [9]) until the assigned phonebook entry appears in the display.
.Press [ /flash] or [
] on the handset to dial the number.
Switching to the Handset Speakerphone During a Call
To switch a normal call to the speakerphone, press [
] on the handset. To switch from a speaker phone call to a normal call, press [ 
].
Using Caller ID, Call Waiting
If you subscribe to Caller ID from your phone company, your phone shows you the caller’s phone number and name (if available) whenever a call comes in. If you subscribe to both Call Waiting and Caller ID, the phone also shows you the name and the number of any call that comes in while you’re on the line.
30