Installing Your Handset
Charge the Battery
1.Unpack the handset, battery pack, and battery cover. If the battery cover is already on the handset, press in on the notch and slide the cover down and off.
Black
Red
2.Line up the battery pack connector with the jack inside the handset. (The battery connector will only fit one way.)
3.Push the battery pack connector in until it clicks into place. Tug gently on the wires to make sure the battery pack is securely connected.
4.Place the cover over the battery compartment and
slide it up into place.
5. Connect the AC adapter to the charger's AC IN 8V jack and set the plug into the notch as shown. (This adapter might already be connected.)
6. Plug the other end of the adapter into a standard 120V AC power outlet.
7. Place the handset in the charger with the display facing forward. The charge light should turn on.
If... | Try... |
|
|
the charge | xxreseating the handset. |
light does not | xxchecking the AC adapter connection. |
turn on | xxseeing if the outlet is controlled by a wall |
| |
| switch. |
##Charge the handset completely (about 15 hours) before using it.
2 - English