Registering to a Base
##The accessory handset won't work until you register it to a base!
Compatible Bases
This handset is designed for use with Uniden's D2998 and D2997 bases. For the most
Registration Methods
There are three different registration methods, but it's easy to figure out which one applies to your handset and base. Answer the two questions to register the handset to one of the compatible bases.
Does the handset fit in the base cradle?
Yes | Place the handset in the base. The display should say Registering. |
No | Does the base have an LCD display? |
Yes 1. On the base, open the menu and select Register Handset. The display should say Registering.
2.On the handset, press and hold Pound (#) until the display says Registering (about 2 seconds).
No 1. Disconnect the base AC adapter.
2.On the base, press and hold Find while you reconnect the adapter.
3.On the handset, press and hold Pound (#) until the display says Registering (about 2 seconds).
##After about 30 seconds, the handset display should say Registration Complete.
Test the connection
Pick up the handset and press Talk/end. Make sure you get a dial tone. (Press Talk/end again to hang up.)
If... | Try... |
|
|
xxyou don't hear a dial tone | Making sure the handset is fully |
xxthe display says Registration Failed | charged, then trying again. |
|
|
English - 3