lCD audio: | 98 dB |
(4)Total harmonic distortion:
lCD audio: | 0.0025 % |
Digital audio output: |
|
Coaxial digital output: | Pin jack |
Pickup |
|
Wave length: | 662 nm/785 nm |
Laser power: | CLASS 2/CLASS 3A |
Note:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Solder:
This model uses lead free solder (PbF).
CONTENTS
| Page |
|
| Page | |
1 | SAFETY PRECAUTIONS | 4 |
| 7.6. Optical Pickup Unit | 15 |
| 1.1. GENERAL GUIDELINES | 4 |
| 7.7. Traverse Motor | 17 |
2 | PREVENTION OF ELECTRO STATIC DISCHARGE (ESD) TO |
| 8 | 19 | |
| ELECTROSTATICALLY SENSITIVE (ES) DEVICES | 4 |
| 8.1. Optical Pickup Breakdown Diagnosis | 19 |
3 | Precaution of Laser Diode | 5 |
| 8.2. Service Mode Table 1 | 20 |
4 | About lead free solder (PbF) | 5 |
| 8.3. DVD Self Diagnostic | 20 |
5 | PREVENTION OF STATIC ELECTRICITY DISCHARGE | 6 |
| 8.4. Last Error Code saved during NO PLAY | 21 |
| 5.1. Grounding for electrostatic breakdown prevention | 6 |
| 8.5. Service mode table 2 | 22 |
| 5.2. Handling Precautions for Traverse Unit (Optical Pickup) | 6 |
| 8.6. Sales demonstration lock function | 24 |
6 | DISASSEMBLING THE CASING AND CHECKING P.C.B.S | 7 |
| 8.7. Handling After Completing Repairs | 24 |
| 6.1. Disassembly Procedure | 7 | 9 | Service Precautions | 25 |
| 6.2. Casing Parts and P.C.B. Positions | 7 |
| 9.1. Recovery after the dvd player is repaired | 25 |
| 6.3. Top Panel | 8 |
| 9.2. Firmware | 25 |
| 6.4. Front Panel | 8 | 10 | ADJUSTMENT PROCEDURES | 26 |
| 6.5. Mic P.C.B. and Operation P.C.B. | 8 |
| 10.1. Service Tools and Equipment | 26 |
| 6.6. Module P.C.B. | 9 |
| 10.2. Important points in adjustment | 26 |
| 6.7. Mechanism Unit | 9 |
| 10.3. Storing and Handling Test Discs | 26 |
| 6.8. Rear Panel | 9 |
| 10.4. Optical adjustment | 27 |
| 6.9. Mother P.C.B. and Power SW P.C.B. | 9 | 11 | Abbreviations | 29 |
| 6.10. Service Position | 10 | 12 | VOLTAGE CHART | 31 |
7 | ASSEMBLING AND DISASSEMBLING THE MECHANISM UNIT |
| 12.1. MOTHER P.C.B. | 31 | |
|
| 11 |
| 12.2. MODULE P.C.B. | 32 |
| 7.1. Disassembly Procedure | 11 |
| 12.3. MIC P.C.B. | 33 |
| 7.2. Traverse Unit | 11 | 13 | BLOCK DIAGRAM | 35 |
| 7.3. Tray | 12 |
| 13.1. OVERALL BLOCK DIAGRAM | 35 |
| 7.4. Loading section | 13 |
| 13.2. POWER SUPPLY BLOCK DIAGRAM | 36 |
| 7.5. Loading motor P.C.B. | 14 |
| 13.3. SERVO BLOCK DIAGRAM | 37 |
2