Expanding Your Phone
Adding accessory handsets
Your phone supports a total of six cordless handsets, including any that were supplied with your phone. You can now place a
•Your phone is compatible with the following Uniden DECT6.0 accessory handsets: DCX150, DCX200, and DCX300. (Please visit our website at www.uniden.com for the most
•If you purchase any accessory handsets separately, you must register the handsets to the base before you can use them. (Accessory handsets that come packaged with a base are already registered to that base.)
Registering accessory handsets
When charged, registered handsets display a handset ID number. Handsets that have not been registered display:
↔
To register a DCX150 accessory handset:
1)Charge the handset completely. (See page 8 for instructions on connecting the charger and page 9 for instructions on charging the handset.)
2)Place the handset in the base cradle for about thirty seconds. Handset Registering will appear in the LCD.
3)When the handset has registered to the base, the LCD will display Registration complete then show the handset ID number.
If the display shows Registration failed, repeat the process again.
To register a DCX200 or DCX300 accessory handset:
1)Charge the handset completely. (See the manual supplied with the accessory handset for instructions on connecting the charger and charging the handset.)
2)Disconnect the base AC adapter. Then press and hold find while you reconnect the adapter. Keep holding find until the charge LED starts to blink.
Installing the Phone
13