Place the mounting slots over the pins on the wall plate.
Slide the base down to lock it into place.
Removing the wall-mount bracket
At the bottom of the base, pinch the two "nose" of the
Wall plate | (To AC outlet) |
|
Note: Mounting the phone directly on the wall
• Be sure the wall is capable of supporting the weight of the phone, and use the proper type of anchoring device for the wall material.
•Insert two #10 screws (minimum length of 1 3/8 inches, not supplied) into the wall, 3 15/16 inches apart.
•Leave the screw heads 1/8 inch away from the wall to allow room for mounting the phone.
•Align the mounting slots over the screws and
slide the base down into place as shown above.
45
Using Special Features