Uniden DXI5586-3 General Information, AC Adapter Information, Battery Information, Frequency

Page 35

General Information

The phone complies with FCC Parts 15 and 68.

°F)

Operating temperature: -10

°C to 50°C (+14°F to +122

AC Adapter Information

(For the main base)

(For the charging cradle)

 

AC Adapter part number:

AD-314

AD-310 or AD-1010

Input Voltage:

120V AC 60Hz

120V AC 60Hz

Output Voltage:

9V DC 350mA

9V DC 210mA

Battery Information

 

 

Battery part number:

BT-905

 

Capacity:

600mAh, 3.6V

 

Frequency

925.181-927.451 MHz

 

 

5739.320-5746.130 MHz

 

To avoid damage to the phone use only Uniden AD-314, AD-310 or AD-1010 and BT-905 with your phone.

• If the handset is left off the cradle, the actual Talk Mode duration will be reduced respective to the amount of time the handset is off the cradle.

Recharge your phone on a regular basis by returning the handset to either cradle after each phone call. When the operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage, the battery should last about one year.

Areplacement Uniden adapter or battery may be purchased by calling 1-800-554-3988 (Mon - Fri 8 am to

5 pm, CST).

Specifications, features, and availability of optional accessories are all subject to change without prior notice.

www.uniden.com

G E N E R A L I N F O R M AT I O N [ 35 ]

G E N E R A L I N F O R M AT I O N

Image 35
Contents Page Contents Welcome Features Handsets Controls and FunctionsMain Base Extra Charging Cradle Terms Used in this Manual AccessibilityAvoid microwave ovens Installing the PhoneChoose the Best Location Do the following stepsInstall the Rechargeable Battery Packs into the Handsets Do not use any other AC adapter Modular Mount the Main Base on a Wall Standard wall plate mounting To remove the beltclip Installing the BeltclipDirect wall mounting To attach the beltclipHeadset Installation Register Handsets to the Main Base before UsingWhen to Re-register Handsets Activating Caller ID on Call Waiting Handset 1 only Basic SetupActivating AutoTalk Entering Your Area Code Choosing the Dialing Mode Handset 1 onlySelecting the Ring Tone and Volume Setting the LanguageReceiving a call Using Your PhoneMaking and Receiving Calls Making a callRedialing the Last Dialed Number Transferring a CallTo transfer a call To receive a transfer callTemporarily Mute Ringer Adjusting the Earpiece VolumeTone Dialing Switch-over Find Handset Traveling Out-of-RangeSelecting a Different Channel Voice Mail Waiting Indicator Using Call WaitingStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name John DOE MOM and DAD Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Deleting all Caller ID names/numbers Deleting Information from the Caller ID ListDeleting a Caller ID message Caller ID on Call Waiting Cidcw Making a Call from the Caller ID List Changing the Digital Security Code Talk and Standby Times Low battery alertPower Failure Battery replacement and handlingCleaning the battery charging contacts Frequency Battery InformationGeneral Information AC Adapter InformationSymptom Suggestion Charge/in use LED or TroubleshootingSymptom Suggestion Symptom Suggestion Case Action Liquid DamageFCC Wants You To Know PrecautionsImportant Safety Instructions Cordless Telephone Privacy One Year Limited WarrantyTerminal Equipment Radio Equipment G, H, I, J, K, L IndexMemo Memo E M O R Y L I S T Need a Part? Help for our Special Needs Customers At Uniden, well take care of you