Uniden DXI5586-3 manual Installing the Phone, Choose the Best Location, Do the following steps

Page 7

Installing the Phone

Do the following steps:

A. Choose the Best Location

B. Install the Rechargeable Battery Packs into the Handsets

C. Connect the Main Base and Charging Cradle, and Charge the Handsets D. Mount the Main Base on a Wall

A. Choose the Best Location

Before choosing a location for your new phone, here are some important guidelines you should consider:

If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the

INSTALLING THE PHONE

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Choose a central location

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock

Avoid personal computers

Avoid other cordless telephones

system does not disable your alarm equipment.

If you have questions about what will disable your alarm equipment, contact your telephone company or a qualified installer.

The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a switch).

The main base and each handset should be kept away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting.

The cradle can be placed on a desk, tabletop, or mounted on a standard wall plate. For better reception, place the main base as high as possible.

The main base should be placed in an open area for optimum range and reception.

www.uniden.com

I N S TA L L I N G T H E P H O N E [ 7 ]

Image 7
Contents Page Contents Welcome Features Handsets Controls and FunctionsMain Base Extra Charging Cradle Terms Used in this Manual AccessibilityAvoid microwave ovens Installing the PhoneChoose the Best Location Do the following stepsInstall the Rechargeable Battery Packs into the Handsets Do not use any other AC adapter Modular Mount the Main Base on a Wall Standard wall plate mounting To remove the beltclip Installing the BeltclipDirect wall mounting To attach the beltclipHeadset Installation Register Handsets to the Main Base before UsingWhen to Re-register Handsets Activating AutoTalk Basic SetupActivating Caller ID on Call Waiting Handset 1 only Entering Your Area Code Choosing the Dialing Mode Handset 1 onlySelecting the Ring Tone and Volume Setting the LanguageReceiving a call Using Your PhoneMaking and Receiving Calls Making a callRedialing the Last Dialed Number Transferring a CallTo transfer a call To receive a transfer callTone Dialing Switch-over Adjusting the Earpiece VolumeTemporarily Mute Ringer Selecting a Different Channel Traveling Out-of-RangeFind Handset Voice Mail Waiting Indicator Using Call WaitingStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name John DOE MOM and DAD Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Deleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Caller ID on Call Waiting Cidcw Making a Call from the Caller ID ListChanging the Digital Security Code Talk and Standby Times Low battery alertCleaning the battery charging contacts Battery replacement and handlingPower Failure Frequency Battery InformationGeneral Information AC Adapter InformationSymptom Suggestion Charge/in use LED or TroubleshootingSymptom Suggestion Symptom Suggestion Case Action Liquid DamageImportant Safety Instructions PrecautionsFCC Wants You To Know Cordless Telephone Privacy One Year Limited WarrantyTerminal Equipment Radio Equipment G, H, I, J, K, L IndexMemo Memo E M O R Y L I S T Need a Part? Help for our Special Needs Customers At Uniden, well take care of you