Expanding Your Phone
Adding accessory handsets
Your phone supports a total of six cordless handsets, including any that were supplied with your phone. You can now place a
•Your phone is compatible with the following Uniden DECT6.0 accessory handsets: DCX200, DCX300 and DWX207. (Please visit our website at www.uniden.com for the most
•For instructions on connecting the charging cradle, see page 7.
•If you purchase any accessory handsets separately, you must register the handsets to the base before you can use them. (Accessory handsets that come packaged with a base are already registered to that base.)
Registering accessory handsets
When charged, registered handsets display a handset ID number. .
2) | Place the handset in the base cradle for about thirty seconds. HANDSET |
|
| |
|
|
| ||
VQ TGIKUVGT | ||||
3) | When the handset has registered to the base, the LCD will display | /CPWCN HQT J G NR | ||
Handsets that have not been registered display as shown. |
|
|
| |
To register a DCX300 accessory handset: |
|
|
| |
) Charge the handset for |
|
|
| |
| REGISTERING will appear in the LCD. | 5GG [QWT 1YP T U |
REGISTRATION COMPLETE then show the handset ID number.
If the display shows REGISTRATION FAILED, repeat the process again. To register a DCX200 or DWX207 accessory handset:
) Charge the handset for
2)Disconnect the base AC adapter. Then press and hold [find] while you reconnect the adapter. Keep pressing [find] until the charge LED starts to blink.
3)On the handset, press and hold [#] until the handset beeps and displays HANDSET REGISTERING.
4)When the handset has registered to the base, the LCD will display REGISTRATION COMPLETE then show the handset ID number.
Installing the Phone
12