Uniden DXAI685 Reviewing Time and Day Stamp, Setting Your Outgoing Message OGM, Preset Messages

Page 43

6.Press the flash/function key again.

Note: A beep indicates the new time is programmed, and the new Time and Day Stamp is announced from the Base speaker. You are then prompted for a PIN code.

7.Enter the two-digit number you want to use as your PIN code.

8.Press flash/function again.

A beep indicates the new PIN number is programmed.

9.For example, to set the time to Tuesday at 3:20 PM, and your PIN code to 00, press caller id, then press flash/function, followed by these keys.

flash/function flash/function

Reviewing Time and Day Stamp

1.Press 6.

The speaker beeps, and the Time and Day Stamp is announced.

Setting Your Outgoing Message (OGM)

When you receive a call, the Answering System answers and automatically plays either a preset message or your personal Outgoing Message.

Preset Messages

The DXAI685 has two messages programmed in its memory. If the REC TIME/ANN/4/1 switch is in either the four or one position, the first preset message below plays. Incoming messages are limited to four or one minute respectively. If the switch is set in the left position, (i.e., the “Announce Only” position) the second message below plays, and no incoming messages are recorded.

∙Hello. No one is available to take your call. Please leave your message after the tone.

∙Hello. No one is available to take your call.

Note: If the REC TIME/ANN/4/1 switch is in the “Announce Only” position, the Message Counter LED displays an A when the system is in Standby.

43

Image 43

Contents Contents Page Important Safety Instructions Battery Safety Precautions Introduction FeaturesDXAI685 Included with the DXAI685Radio Interference Telephone Line ProblemsImportant Electrical Considerations RangeSelecting a Location InstallationTelephone Line Outlets Applying Power to the Base Unit Connecting the Telephone CordsPlace the Base on a desk or tabletop Desk or Tabletop InstallationUse only the Uniden AC Adapter supplied with this Phone Standard Wall Plate Mounting Wall InstallationPlace the AC Adapter cord inside the molded channel Direct Wall Mounting Ring VOL PULSE-TONE DC OFF-LO-HI Setting the Handset Retainer Put the retainer back into its slot on the Base Unit This page intentionally blank Installing the Handset Battery Pack Setting Up Your PhoneExtending the Base Unit Antenna Page Cleaning the Battery Contacts Low Battery Indicator Charging the Battery PackInitial Battery Charging Battery Memory Effect Setting the Pulse/Tone SwitchTo Avoid Memory Effect Base Volume Controls Handset Volume ControlsAutomatic Digital Code Security Page Page To enter your local area code Entering the Local Area CodeTo delete your local area code To turn Caller ID on Call Waiting off Setting Caller ID on Call WaitingSetting the AutoTalk Feature To turn Caller ID on Call Waiting onAutotalk on ON-1 OFF-0 Autotalk on ON-1OFF-0 To turn AutoTalk off Autotalk OFF ON-1OFF-0Making Calls Using Your PhoneAnswering a Call without AutoTalk Enabled Answering a Call with AutoTalk EnabledReceiving Calls Redialing the Last Number Called Using the Flash Key with Call WaitingLCD with Handset on Base Using Caller IDCaller ID Display Viewing Calls in MemoryDeleting Caller ID messages Calling the Displayed NumberStoring a Caller ID memory number in Dial Memory Programming Your PhoneEntering a Number in Dial Memory NAME? Editing and Deleting Numbers in Dial Memory Calling a Number Stored in MemoryBob Jones ∙ Time and Day Stamp ∙ Toll Saver Integrated Answering SystemSetting the Clock and PIN Code Answering System SetupTurning the Answering System On/Off Preset Messages Setting Your Outgoing Message OGMReviewing Time and Day Stamp Recording Your Personal OGM Selecting a Preset OGMSetting the Toll Saver Switch VOX/Calling Party Control FeatureUsing the Reset Button Page Playing New Messages Using Your Answering SystemRepeating a Message Playing a Stored MessageSkipping a Message Deleting a Message Deleting All Messages Leaving a Memo Message Message Full IndicationPage Remote Operation Using a Touch-Tone PhoneTelephone Troubleshooting Chart TroubleshootingAnswering System Troubleshooting Chart Base Unit SpecificationsDxai Precautions Handset Controls and Keys Base Unit Controls and Keys One Year Limited Warranty