XS210.Qx 10/6/03 5:27 PM Page 7
ADJUSTING THE RINGER AND EARPIECE VOLUME
Ringer tone
When the phone is in standby mode, pressing the 
key on the
handset selects the handset ringer tone. "Press 
to listen to the first
tone. While the first tone is still ringing, press 
again to hear the second tone. Repeat process to toggle between the two tone options."
Earpiece volume
The handset earpiece volume settings (Low, Medium and High) can only be
adjusted during a call. Press the 
key repeatedly to select Low, Medium and High. When you hang up, the phone keeps the last volume setting selected.
Ringer mute
The 
key can be used to temporarily mute the ringer tone. When the
handset is off the base and the phone is ringing, press the 
key and the ringer tone will be temporarily silenced. The call will not be answered, and the ringer tone will return to normal starting with the next incoming call.
TRAVELING OUT-OF-RANGE
During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base unit, your call will terminate within 1 minute.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your phone, you can manually change the phone’s channel for clear operation. This function works only when the phone is in use.
Press 
. The talk/batt low LED flashes, indicating the phone is changing to another channel. There are twenty channels to choose from.
PAGE
To locate the handset (while it’s off the base), press | on the base. |
The handset beeps for 60 seconds. |
|
Paging is canceled when pressing any handset key, | on the |
base or return the handset to the base. |
|
|
|
6