Uniden EXT3165 manual Liquid Damage, Case Action

Page 42

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.

Case	Action
If the handset or base is exposed	Wipe off the liquid and use as normal.
to moisture or liquid, but only affects
the exterior plastic housing.

If moisture or liquid has entered the	Handset:
plastic-housing (i.e. liquid can be	1. Remove the battery cover and leave it off for ventilation.
heard in the phone or liquid has	2. Remove the battery pack by disconnecting.
entered the handset battery	3. Leave the battery cover off and the battery pack disconnected for at least 3 days.
compartment or vent openings	4. Once completely dry, reconnect the battery pack and the battery cover.
on the base).	5. Recharge the handset’s battery pack for 20 hours in the base unit before using the phone.

Base:

1.Disconnect the AC adapter from the base unit, cutting off electrical power.

2.Disconnect the telephone cord from the base unit.

3.Let dry for at least 3 days.

IMPORTANT: You must unplug the telephone line while recharging the battery pack to avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven.

After following these steps, if your cordless telephone does not work, please send to: Uniden America Corporation

Parts and Service Division

4700 Amon Carter Blvd. Ft. Worth, TX 76155

1-800-554-3988. Monday through Friday 8 a.m. to 5 p.m. CST

[ 42 ] A D D I T I O N A L I N F O R M AT I O N

www.uniden.com

Image 42

Contents Page Page Quick Reference Guide Contents Welcome Features Controls and Functions N T R O L S a N D F U N C T I O N S Setting up the Phone Choose the best locationDo the following steps Install the rechargeable battery pack into the handset E T T I N G S TA R T E D Battery use time per charge Low battery alertCleaning the charging contacts Connect the base unit AC adapterMounting the Base Unit on a Wall Standard wall plate mountingDirect wall mounting Setting Menu Options Caller ID optionsChoosing the dialing mode Setting the language Making and Receiving Calls Handset On Base Handset Off BaseEarpiece volume Adjusting the Handset Ringer and Earpiece VolumeHandset ringer tone and volume Temporarily Mute RingerTone Dialing Switch-over RedialTraveling Out-of-Range Selecting a Different Channel Flash and Call WaitingStoring Phone Numbers and Names Memory Dialing Steps for Entering Names and Special Characters If you make a mistake while entering a nameMemory dialing from Standby Mode Making Calls with Memory DialingMemory dialing from Talk Mode Chain DialingEditing a Stored Name and/or Phone Number Replace Memory? Yes Memory01 Stored Movies Erasing a Stored Name and Phone Number Press select or delete/chUsing One Touch Voicemail Access Programming your Voicemail Access NumberDeleting your Voicemail Access Number Dialing your Voicemail ServiceMessage Waiting Indicator When the Telephone Rings You must subscribe to Caller ID service to use this featureCaller ID Viewing the Caller ID Message List Press cid/menuDeleting Information from the Caller ID List When the pointer is at ¨Yes¨When the pointer is at ¨No¨ Deleting a Caller ID messageOr vol/ring Using the Caller ID List Long Distance calls and Area Code Setting/CancellationCalling a party from the Caller ID list Features Storing Caller ID messages in Memory dialingChanging the Digital Security Code Installing the BeltclipHeadset Installation To attach the beltclipPower Failure MaintenanceBattery replacement and handling When the handset or base unit becomes slightly dirtyTroubleshooting Symptom Suggestion Charge/in use/voicemailSymptom Suggestion Liquid Damage Case ActionBattery Information General InformationAC Adapter Information Precautions Installation Considerations Terminal Equipment Radio Equipment K, L Memo Memo Memo At Uniden, we´ll take care of you