Uniden EXI2960, EXI2965 manual Mounting the Base Unit on a Wall, Standard wall plate mounting

Page 12

DO NOT use an outlet controlled by a wall switch.

If you have wall mounted the base, you have to remove the belt- clip to hang the handset with the display facing forward.

Mounting the Base Unit on a Wall

Setting the handset retainer clip for wall mounting

1)On the base unit, pull the handset retainer clip out of the slot and rotate it clockwise 180 degrees.

2)Flip the retainer clip from front to back. Slide it back into the slot so that the lip of the retainer is up and the ▼ is down. The retainer holds the handset in place.

Standard wall plate mounting

This phone can be mounted on any standard wall plate.

1)Plug the AC adapter into the DC IN 9V jack.

2)Wrap the AC adapter cord inside the molded wiring channel as shown.

3)Plug the AC adapter into a standard 120V AC wall outlet.

4)Place the handset on the base unit and charge for 15-20 hours.

5)Plug the telephone line cord into the TEL LINE jack. Wrap the cord inside the molded wiring channel as shown.

6)Plug the telephone line cord into the telephone outlet.

7)Raise the antenna to a vertical position.

8)Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.

[ 10 ] G E T T I N G S TA R T E D

Image 12

Contents Page Welcome Features Contents Controls and Functions Read this First 6 to12 to Checking the Package Contents Setting up the Phone Choose the best locationDo the following steps Battery use time per charge Low Battery Alert Cleaning the Battery Charging Contacts Connect the base unit ContactsE T T I N G S TA R T E D Choose the dialing mode Setting the handset retainer clip for wall mounting Mounting the Base Unit on a WallStandard wall plate mounting Direct wall mounting Setting Caller ID Options Entering Your Area Code Making and Receiving Calls TerminologyHandset On Base Adjusting the Handset Ringer and Earpiece Volume Tone Dialing Switch-overRinger tone and volume Earpiece volumeTraveling Out-of-Range Selecting a Different ChannelFlash and Call Waiting Storing Phone Numbers and Names You haveSteps for Entering Names and Special Characters If you make a mistake whileEntering a name Number of times key is pressedMemory dialing from Standby Mode Memory dialing from Talk ModeMaking Calls with Memory Dialing Display a Programmed NumberChain Dialing Editing a Stored Name and/or Phone NumberErasing a Stored Name and Phone Number 7Press select or deleteWhen the Telephone Rings You must subscribe to Caller ID service to use this featureCaller ID When the pointer is at ¨ Yes¨ When the pointer is at ¨ No¨ Viewing the Caller ID Message ListDeleting Information from the Caller ID List Deleting a Caller ID messageWhen the pointer is at ¨Yes¨ When the pointer is at ¨No¨Deleting all Caller ID names/numbers Using the Caller ID List Long Distance calls and Area Code Setting/CancellationCalling a party from the Caller ID list Dial editStoring Caller ID messages in Memory dialing Changing the Digital Security Code Information AdditionalInstalling the Beltclip Headset InstallationTo a t t a c h t h e b e l t c l i p To re m ove t h e b e l t c l i pMaintenance Battery replacement and handlingWhen slightly dirty When very dirtyTroubleshooting Symptom SuggestionBattery Information General InformationAC Adapter Information At Uniden, we´ll take care of you Please do not Return this Product to the Place of PurchaseIndex K, L