Uniden EXI 7246 Series manual Connect the Base Unit and Charge the Handset, Use only the supplied

Page 11

C. Connect the Base Unit and Charge the Handset

1)	Connect the AC adapter to the DC IN 9V jack and to
	a standard 120V AC wall outlet.	Route the cord.
2)	Place the handset in the base unit with the keypad
	facing forward.
3)	Make sure the charge/in use LED illuminates.
	If the LED does not illuminate, check to see that the AC
	adapter is plugged in and the handset makes good
	contact with the base charging contacts.

• Connect the AC adapter to a continuous power supply.

• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

4)Charge your handset at least 15-20 hours before plugging into the phone line.

5) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL
LINE jack and a telephone outlet.
If your telephone outlet isn't modular, contact	Modular
your telephone company for assistance.	Modular

w w w . u n i d e n . c o m

!

•Use only the supplied

AD-0001 AC adapter. Do not use any other AC adapter.

•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

G E T T I N G S T A R T E D [ 9 ]

G E T T I N G S T A R T E D

Image 11

Contents Page Page W . u n i d e n . c o m U I C K R E F E R E N C E G U I D E Contents Welcome Features Controls and Functions Terms Used in this Manual Do the following steps Installing the PhoneChoose the Best Location Install the Rechargeable Battery Pack into the Handset Use only the supplied Connect the Base Unit and Charge the HandsetStandard wall plate mounting Mount the base unit on a wallDirect wall mounting Installing the BeltclipHeadset Installation Activating Caller ID on Call Waiting Basic SetupActivating AutoTalk Entering Your Area Code Setting the Language Choosing the Dialing ModeSelecting the Ring Tone and Volume Receiving a call Using Your PhoneMaking and Receiving Calls Making a callTemporarily Mute Ringer Adjusting the Earpiece VolumeRedialing the last dialed number Selecting a Different Channel Tone Dialing Switch-overTraveling Out-of-Range Find Handset Using Call WaitingVoice Mail Waiting Indicator Storing the RocketDial RocketDialStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name W . u n i d e n . c o m Storing Caller ID messages in Speed Memory Locations Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting When the Telephone RingsL L E R I D F E a T U R E S 2 Viewing the Caller ID Message ListDeleting all Caller ID names/numbers Deleting Information from the Caller ID ListDeleting a Caller ID message Making a Call from the Caller ID List Changing the Digital Security Code Power Failure Low battery alertBattery replacement and handling Cleaning the battery charging contacts Frequency General InformationSymptom Suggestion TroubleshootingAppliances Base Liquid DamageCase Action HandsetImportant Electrical Considerations Important Safety InstructionsOne Year Limited Warranty Installation ConsiderationsTerminal Equipment Radio Equipment G, H, I, J, K, L IndexMemory List Memo Please do not Return this Product to the Place of Purchase Register Online Today